Bump github/codeql-action/init from 4.37.0 to 4.37.2

[dependabot]

Bumps github/codeql-action/init from 4.37.0 to 4.37.2.

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.2

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

v4.37.1

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

4.36.1 - 02 Jun 2026

No user facing changes.

4.36.0 - 22 May 2026

• Breaking change: Bump the minimum required CodeQL bundle version to 2.19.4. #3894
• Add support for SHA-256 Git object IDs. #3893
• Update default CodeQL bundle version to 2.25.5. #3926

4.35.5 - 15 May 2026

• We have improved how the JavaScript bundles for the CodeQL Action are generated to avoid duplication across bundles and reduce the size of the repository by around 70%. This should have no effect on the runtime behaviour of the CodeQL Action. #3899
• For performance and accuracy reasons, improved incremental analysis will now only be enabled on a pull request when diff-informed analysis is also enabled for that run. If diff-informed analysis is unavailable (for example, because the PR diff ranges could not be computed), the action will fall back to a full analysis. #3791
• If multiple inputs are provided for the GitHub-internal analysis-kinds input, only code-scanning will be enabled. The analysis-kinds input is experimental, for GitHub-internal use only, and may change without notice at any time. #3892
• Added an experimental change which, when running a Code Scanning analysis for a PR with improved incremental analysis enabled, prefers CodeQL CLI versions that have a cached overlay-base database for the configured languages. This speeds up analysis for a repository when there is not yet a cached overlay-base database for the latest CLI version. We expect to roll this change out to everyone in May. #3880

... (truncated)

Commits

• e064762 Merge pull request #4027 from github/update-v4.37.2-385bcdc5a
• e0faed8 Add a couple of change notes
• 73aad0e Update changelog for v4.37.2
• 385bcdc Merge pull request #4026 from github/dependabot/npm_and_yarn/tar-7.5.20
• de0229c Merge branch 'main' into dependabot/npm_and_yarn/tar-7.5.20
• 115e8cb Merge pull request #4010 from github/mbg/ts/update-release-branch
• dbdf0b0 Bump tar from 7.5.16 to 7.5.20
• 830c231 Merge pull request #4023 from github/mbg/ff/remove-new-remote-file-addresses-ff
• 69fd9e9 Merge pull request #4024 from github/mbg/private-registry/make-docker-available
• b855687 Always make docker_registry registries available
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

---

Summary by cubic

Bump github/codeql-action/init from 4.37.0 to 4.37.2 to adopt upstream fixes and features. This enables the new default config-file address format (including remote=), adds support for fetching remote configs from authenticated private registries in Default Setup, and updates the default CodeQL bundle to 2.26.1.

^{Written for commit 4d2375f. Summary will update on new commits.}

[drift-check]

Code Review Bot

No comment/code divergences or documentation drift detected. Reviewed 1 file(s); skipped 0.

[chatgpt-codex-connector]

💡 Codex Review

Here are some automated review suggestions for this pull request.

Reviewed commit: 4d2375f10d

ℹ️ About Codex in GitHub

Codex has been enabled to automatically review pull requests in this repo. Reviews are triggered when you

• Open a pull request for review
• Mark a draft as ready
• Comment "@codex review".

If Codex has suggestions, it will comment; otherwise it will react with 👍.

When you sign up for Codex through ChatGPT, Codex can also answer questions or update the PR, like "@codex address that feedback".

[chatgpt-codex-connector]

Use one CodeQL action version throughout

This bumps only the init step to v4.37.2 while the later Perform CodeQL Analysis step still uses the v4.37.0 SHA. In this workflow, init writes the CodeQL action configuration and analyze loads it; CodeQL validates that all github/codeql-action steps use the same action version, so scheduled/PR scans can fail before uploading results. Please bump the analyze SHA/comment to the same v4.37.2 revision in the same change.

Useful? React with 👍 / 👎.

[dependabot]

Superseded by #26.