Skip to content

chore(deps): bump the python-dependencies group with 2 updates - #151

Merged
github-actions[bot] merged 1 commit into
mainfrom
dependabot/pip/python-dependencies-743abd5ad5
Nov 16, 2026
Merged

github-actions[bot] merged 1 commit into
mainfrom
dependabot/pip/python-dependencies-743abd5ad5

Conversation

@dependabot

@dependabot dependabot Bot commented on behalf of github Nov 16, 2026

Copy link
Copy Markdown
Contributor

Bumps the python-dependencies group with 2 updates: zlib-ng and isal.

Updates zlib-ng from 1.0.0 to 1.1.0

Release notes

Sourced from zlib-ng's releases.

version 1.1.0

  • Python 3.10 and PyPy 3.10 are no longer supported. Added support for PyPy 3.12 and Python 3.15.
  • Update included zlib-ng distribution to 2.3.3.
  • Fix BrokenPipeError when piping python -m zlib_ng.gzip_ng into head, less or similar programs.
  • Fix gzip_ng_threaded writers that waited forever when writing to the underlying file failed, for example, because the disk was full. A later call to write(), flush(), or close() raises the error. After an error, close() no longer closes a file object that you passed to gzip_ng_threaded.open.
  • Wheels are now built for Windows arm64 architectures.
  • Restore PyPy wheel builds.
  • Fix a crash when calling copy() on a flushed compress object on Python 3.15. Python 3.15 changed ([gh-134745](https://github.com/pycompression/python-zlib-ng/issues/134745) <https://github.com/python/cpython/issues/134745/>__) PyThread_release_lock to use PyMutex internally, which now raises a fatal error when releasing a lock that was never acquired.
  • Fix gzip_ng_threaded writers at compression level 1, which raised OverflowError for data that does not compress and consists mostly of bytes 144 to 255.
  • Extraordinarily large gzip headers with either a very long comment or filename will now cause an OverflowError rather than use more and more memory. The size is limited to the internal buffer size which is currently set at 512 KiB.
Changelog

Sourced from zlib-ng's changelog.

version 1.1.0

  • Python 3.10 and PyPy 3.10 are no longer supported. Added support for PyPy 3.12 and Python 3.15.
  • Update included zlib-ng distribution to 2.3.3.
  • Fix BrokenPipeError when piping python -m zlib_ng.gzip_ng into head, less or similar programs.
  • Fix gzip_ng_threaded writers that waited forever when writing to the underlying file failed, for example, because the disk was full. A later call to write(), flush(), or close() raises the error. After an error, close() no longer closes a file object that you passed to gzip_ng_threaded.open.
  • Wheels are now built for Windows arm64 architectures.
  • Restore PyPy wheel builds.
  • Fix a crash when calling copy() on a flushed compress object on Python 3.15. Python 3.15 changed ([gh-134745](https://github.com/pycompression/python-zlib-ng/issues/134745) <https://github.com/python/cpython/issues/134745/>__) PyThread_release_lock to use PyMutex internally, which now raises a fatal error when releasing a lock that was never acquired.
  • Fix gzip_ng_threaded writers at compression level 1, which raised OverflowError for data that does not compress and consists mostly of bytes 144 to 255.
  • Extraordinarily large gzip headers with either a very long comment or filename will now cause an OverflowError rather than use more and more memory. The size is limited to the internal buffer size which is currently set at 512 KiB.
Commits
  • e7fb99f Merge pull request #94 from pycompression/release_1.1.0
  • fbbcd42 Merge branch 'develop' of github.com:pycompression/python-zlib-ng into develop
  • 7bf3081 Merge branch 'main' into develop
  • 23f248d Merge pull request #93 from pycompression/updatepypy
  • d3ad519 Prevent the empty string object from being resized
  • 459fa5c Fix asan environment
  • dade485 Support newer python versions
  • 3834e9a Add extra pypy version, remove redundant sdist build
  • a21f7f2 Fix asan environment
  • 1201391 Merge pull request #92 from pycompression/release_1.1.0
  • Additional commits viewable in compare view

Updates isal from 1.8.0 to 1.9.1

Release notes

Sourced from isal's releases.

version 1.9.1

  • Fix BrokenPipeError when piping python -m isal.igzip into head, less or similar programs.

version 1.9.0

By far most of the work on this release has been done by @​ptweezy. Almost all bug fixes and improvements are their work.

Major changes:

  • Updated included ISA-L library to 2.32.1.
  • Python 3.10 and PyPy 3.10 are no longer supported. Added support for PyPy 3.12 and Python 3.15.
  • Restore PyPy wheel builds.
  • Fix builds on macOS with Apple Silicon, which used the portable C code of ISA-L rather than its optimized aarch64 assembly. On an Apple M4, decompression is 1.6 to 3 times faster, CRC-32 is 50 times faster, and Adler-32 is 7 times faster.

Optimizations and features:

  • isal_zlib.compressobj supports strategy=Z_FIXED at compression level 0. Level 0 then uses fixed Huffman codes instead of starting each block with a Huffman table of about 110 bytes. This shrinks small flushed writes, such as websocket messages: JSON messages of about 440 bytes, each followed by flush(Z_SYNC_FLUSH), compress to an average of 75 instead of 188 bytes. Blocks of a few KiB or more can be larger: about 5% for JSON and 10% for Python source code at 64 KiB. Other strategies, and Z_FIXED at levels 1 to 3, still give a warning and use the default strategy.
  • Speed up import isal.igzip and import isal.igzip_threaded by importing argparse and shutil only when the command line interface runs, and by dropping the multiprocessing import.
  • Speed up reading lines from binary igzip files through iteration, readlines(), and readline(). On an Apple M4, reading FASTQ data is 1.13 times faster, and reading lines of a few bytes is 1.5 times faster.
  • Speed up each write() call to binary igzip files on CPython. On an AMD Ryzen 7 9800X3D with Python 3.14.8, writing FASTQ data or Python source code one line at a time is 1.1 times faster.
  • Speed up many small writes to igzip.IGzipFile on Python 3.12 and later. IGzipFile collects these writes in the write buffer of gzip.GzipFile and compresses them in large chunks, which makes writing lines 1.4 times faster.

Bug fixes:

  • Fix zlib streams compressed with a preset dictionary so they can be decoded by standard zlib, including builds linked against older ISA-L releases.
  • Fix backward seeking in igzip files by discarding buffered compressed data when rewinding the underlying file.

... (truncated)

Changelog

Sourced from isal's changelog.

version 1.9.1

  • Fix BrokenPipeError when piping python -m isal.igzip into head, less or similar programs.

version 1.9.0

By far most of the work on this release has been done by @ptweezy <https://github.com/ptweezy>_. Almost all bug fixes and improvements are their work.

Major changes:

  • Updated included ISA-L library to 2.32.1.
  • Python 3.10 and PyPy 3.10 are no longer supported. Added support for PyPy 3.12 and Python 3.15.
  • Restore PyPy wheel builds.
  • Fix builds on macOS with Apple Silicon, which used the portable C code of ISA-L rather than its optimized aarch64 assembly. On an Apple M4, decompression is 1.6 to 3 times faster, CRC-32 is 50 times faster, and Adler-32 is 7 times faster.

Optimizations and features:

  • isal_zlib.compressobj supports strategy=Z_FIXED at compression level 0. Level 0 then uses fixed Huffman codes instead of starting each block with a Huffman table of about 110 bytes. This shrinks small flushed writes, such as websocket messages: JSON messages of about 440 bytes, each followed by flush(Z_SYNC_FLUSH), compress to an average of 75 instead of 188 bytes. Blocks of a few KiB or more can be larger: about 5% for JSON and 10% for Python source code at 64 KiB. Other strategies, and Z_FIXED at levels 1 to 3, still give a warning and use the default strategy.
  • Speed up import isal.igzip and import isal.igzip_threaded by importing argparse and shutil only when the command line interface runs, and by dropping the multiprocessing import.
  • Speed up reading lines from binary igzip files through iteration, readlines(), and readline(). On an Apple M4, reading FASTQ data is 1.13 times faster, and reading lines of a few bytes is 1.5 times faster.
  • Speed up each write() call to binary igzip files on CPython. On an AMD Ryzen 7 9800X3D with Python 3.14.8, writing FASTQ data or Python source code one line at a time is 1.1 times faster.
  • Speed up many small writes to igzip.IGzipFile on Python 3.12 and later. IGzipFile collects these writes in the write buffer of gzip.GzipFile and compresses them in large chunks, which makes writing lines 1.4 times faster.

Bug fixes:

... (truncated)

Commits

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.


Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

  • @dependabot rebase will rebase this PR
  • @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
  • @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
  • @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
  • @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
  • @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
  • @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
  • @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

Bumps the python-dependencies group with 2 updates: [zlib-ng](https://github.com/pycompression/python-zlib-ng) and [isal](https://github.com/pycompression/python-isal).


Updates `zlib-ng` from 1.0.0 to 1.1.0
- [Release notes](https://github.com/pycompression/python-zlib-ng/releases)
- [Changelog](https://github.com/pycompression/python-zlib-ng/blob/develop/CHANGELOG.rst)
- [Commits](pycompression/python-zlib-ng@v1.0.0...v1.1.0)

Updates `isal` from 1.8.0 to 1.9.1
- [Release notes](https://github.com/pycompression/python-isal/releases)
- [Changelog](https://github.com/pycompression/python-isal/blob/develop/CHANGELOG.rst)
- [Commits](pycompression/python-isal@v1.8.0...v1.9.1)

---
updated-dependencies:
- dependency-name: zlib-ng
  dependency-version: 1.1.0
  dependency-type: direct:development
  update-type: version-update:semver-minor
  dependency-group: python-dependencies
- dependency-name: isal
  dependency-version: 1.9.1
  dependency-type: direct:development
  update-type: version-update:semver-minor
  dependency-group: python-dependencies
...

Signed-off-by: dependabot[bot] <support@github.com>
@dependabot
dependabot Bot requested a review from zestysoft as a code owner November 16, 2026 04:09
@dependabot dependabot Bot added dependencies Pull requests that update a dependency file python Pull requests that update python code labels Nov 16, 2026
@github-actions
github-actions Bot enabled auto-merge (squash) November 16, 2026 04:09
@github-actions
github-actions Bot merged commit 17e5746 into main Nov 16, 2026
6 checks passed
@github-actions
github-actions Bot deleted the dependabot/pip/python-dependencies-743abd5ad5 branch November 16, 2026 04:14
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

dependencies Pull requests that update a dependency file python Pull requests that update python code

Projects

None yet

Development

Successfully merging this pull request may close these issues.

0 participants