Hi
I am trying to compile the Card Info sketch and I get the following errors:
Arduino: 1.8.10 (Windows 7), Board: "WeMos D1 R1, 80 MHz, Flash, Disabled, All SSL ciphers (most compatible), 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
card_check:24:1: error: 'Sd2Card' does not name a type
Sd2Card card;
^
card_check:25:1: error: 'SdVolume' does not name a type
SdVolume volume;
^
card_check:26:1: error: 'SdFile' does not name a type
SdFile root;
^
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino: In function 'void setup()':
card_check:45:8: error: 'card' was not declared in this scope
if (!card.init(SPI_HALF_SPEED, chipSelect)) {
card_check:57:11: error: 'card' was not declared in this scope
switch (card.type()) {
card_check:58:10: error: 'SD_CARD_TYPE_SD1' was not declared in this scope
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:58:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/BlockDriver.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:101:15: note: 'sdfat::SD_CARD_TYPE_SD1'
const uint8_t SD_CARD_TYPE_SD1 = 1;
card_check:61:10: error: 'SD_CARD_TYPE_SD2' was not declared in this scope
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:61:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/BlockDriver.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:103:15: note: 'sdfat::SD_CARD_TYPE_SD2'
const uint8_t SD_CARD_TYPE_SD2 = 2;
card_check:64:10: error: 'SD_CARD_TYPE_SDHC' was not declared in this scope
case SD_CARD_TYPE_SDHC:
^
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:64:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/BlockDriver.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:32,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:105:15: note: 'sdfat::SD_CARD_TYPE_SDHC'
const uint8_t SD_CARD_TYPE_SDHC = 3;
card_check:72:8: error: 'volume' was not declared in this scope
if (!volume.init(card)) {
card_check:72:20: error: 'card' was not declared in this scope
if (!volume.init(card)) {
card_check:80:18: error: 'volume' was not declared in this scope
Serial.println(volume.fatType(), DEC);
card_check:96:3: error: 'root' was not declared in this scope
root.openRoot(volume);
^
card_check:99:11: error: 'LS_R' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:11: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/ArduinoFiles.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatLib.h:27,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:121:15: note: 'sdfat::LS_R'
const uint8_t LS_R = 8;
card_check:99:18: error: 'LS_DATE' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:18: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/ArduinoFiles.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatLib.h:27,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:117:15: note: 'sdfat::LS_DATE'
const uint8_t LS_DATE = 2;
card_check:99:28: error: 'LS_SIZE' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:28: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/ArduinoFiles.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatLib.h:27,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdFat.h:33,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS\src/SDFS.h:36,
from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD\src/SD.h:25,
from C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:21:
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:119:15: note: 'sdfat::LS_SIZE'
const uint8_t LS_SIZE = 4;
Multiple libraries were found for "SPI.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SPI
Multiple libraries were found for "SD.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD
Not used: C:\Program
Not used: C:\Users\George\Documents\Arduino\libraries\SD
Multiple libraries were found for "SDFS.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS
Multiple libraries were found for "SdFat.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat
exit status 1
'Sd2Card' does not name a type
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Hi
I am trying to compile the Card Info sketch and I get the following errors:
Arduino: 1.8.10 (Windows 7), Board: "WeMos D1 R1, 80 MHz, Flash, Disabled, All SSL ciphers (most compatible), 4M (no SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
card_check:24:1: error: 'Sd2Card' does not name a type
Sd2Card card;
^
card_check:25:1: error: 'SdVolume' does not name a type
SdVolume volume;
^
card_check:26:1: error: 'SdFile' does not name a type
SdFile root;
^
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino: In function 'void setup()':
card_check:45:8: error: 'card' was not declared in this scope
if (!card.init(SPI_HALF_SPEED, chipSelect)) {
card_check:57:11: error: 'card' was not declared in this scope
switch (card.type()) {
card_check:58:10: error: 'SD_CARD_TYPE_SD1' was not declared in this scope
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:58:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:101:15: note: 'sdfat::SD_CARD_TYPE_SD1'
const uint8_t SD_CARD_TYPE_SD1 = 1;
card_check:61:10: error: 'SD_CARD_TYPE_SD2' was not declared in this scope
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:61:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:103:15: note: 'sdfat::SD_CARD_TYPE_SD2'
const uint8_t SD_CARD_TYPE_SD2 = 2;
card_check:64:10: error: 'SD_CARD_TYPE_SDHC' was not declared in this scope
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:64:10: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdSpiCard.h:33:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/SdCard/SdInfo.h:105:15: note: 'sdfat::SD_CARD_TYPE_SDHC'
const uint8_t SD_CARD_TYPE_SDHC = 3;
card_check:72:8: error: 'volume' was not declared in this scope
if (!volume.init(card)) {
card_check:72:20: error: 'card' was not declared in this scope
if (!volume.init(card)) {
card_check:80:18: error: 'volume' was not declared in this scope
Serial.println(volume.fatType(), DEC);
card_check:96:3: error: 'root' was not declared in this scope
root.openRoot(volume);
^
card_check:99:11: error: 'LS_R' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:11: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:121:15: note: 'sdfat::LS_R'
const uint8_t LS_R = 8;
card_check:99:18: error: 'LS_DATE' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:18: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:117:15: note: 'sdfat::LS_DATE'
const uint8_t LS_DATE = 2;
card_check:99:28: error: 'LS_SIZE' was not declared in this scope
root.ls(LS_R | LS_DATE | LS_SIZE);
C:\Users\George\Documents\Sketch Folder\Card_Check\card_check\card_check.ino:99:28: note: suggested alternative:
In file included from C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatFile.h:36:0,
C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat\src/FatLib/FatApiConstants.h:119:15: note: 'sdfat::LS_SIZE'
const uint8_t LS_SIZE = 4;
Multiple libraries were found for "SPI.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SPI
Multiple libraries were found for "SD.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SD
Not used: C:\Program
Not used: C:\Users\George\Documents\Arduino\libraries\SD
Multiple libraries were found for "SDFS.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\SDFS
Multiple libraries were found for "SdFat.h"
Used: C:\Users\George\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.5.2\libraries\ESP8266SdFat
exit status 1
'Sd2Card' does not name a type
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.