Creality K1/K2/3V3/Hi WebSocket integration for Home Assistant (local push, MJPEG or webRTC camera, power controls)
-
Updated
Nov 4, 2026 - Python
Creality K1/K2/3V3/Hi WebSocket integration for Home Assistant (local push, MJPEG or webRTC camera, power controls)
Control a Creality CFS filament box from a K1C without official Creality firmware — validated protocol client
Add wired Ethernet/LAN to a 2023-generation Creality K1C using a compatible USB Ethernet adapter. Includes a ready-to-install driver and source build tools.
Affordable 3D-printable ESP32 weather station for astrophotography
A complete set of OrcaSlicer printer, process, and filament profiles for running a 1.0 mm nozzle on the Creality K1C.
Restores the MJPEG camera stream on Creality K1C firmware 1.3.5.22, where Creality commented out the mjpg_streamer launch in auto_uvc.sh
GuppyScreen for the Creality K1C 2025. Native touchscreen support with optimized framebuffer and touch handling, safe boot integration, and a fully automated one-click installer with automatic configuration and complete rollback to the original printer setup.
G-code file and Klipper macro for the Creality K1C that work fresh lubricant into the rods and lead screws after maintenance. Runs full-travel X, Y, diagonal, and Z moves.
To associate your repository with the k1c topic, visit your repo's landing page and select "manage topics."