Skip to content

Hardware Configuration

Jump to bottom
jpaetsch edited this page Apr 3, 2022 · 2 revisions

Two Raspberry Pi 4's were used and configured using the same series of steps.

  1. Raspberry Pi OS (32-bit) was downloaded onto a freshly formatted SD card using the official Raspberry Pi Imager.
  2. The SD card was inserted and Pi was booted; set Canada location, English (Canada) language, and set Edmonton Time Zone. Use English language and use US keyboard checkboxes were both selected.
  3. Default user passwords were changed to either 'lfias-capstone' or 'lfias_capstone'
  4. Software updates were automatically run after connecting to a Wifi network.
  5. Client hostnames were set (lfias-pi-steven for one board and lfias-pi-huda for the other)
  6. The legacy Pi camera interface was enabled (sudo raspi-config was run in the terminal to select this option)

After restarting, the boards were ready for additional installation of functionality packages and local processing libraries/models.

Clone this wiki locally