Give every body in your Autodesk Fusion design a real filament, match it to the spools loaded on your printer, and send the design to OrcaSlicer, Bambu Studio or PrusaSlicer ready to print.
New in 0.11: a light theme: the palette follows Fusion's light or dark theme, and its text has better contrast.
New in 0.10: any printer: a manual printer takes your printer's nozzle and which filament is in each slot, so Prusa, Creality, Klipper and other printers get the same slot matching and slicer presets as a Bambu Lab printer. The printed stiffness and strength now know 206 filaments from 11 makers' data sheets, and your own slicer presets are found when Bambu Studio or OrcaSlicer is signed out.
New in 0.9.1: every Filamatch filament gets its real stiffness and strength in Fusion (from its data sheet or generic values for its type), instead of the values of the stock material it was copied from. Checked with a free FEA program (static check).
New in 0.9: Printed weight and strength. A printed part is not solid plastic: Filamatch estimates each body's weight as printed (or slices it for the exact grams), and with one switch gives Fusion the printed density, stiffness and strength for its mass and Simulation. Stiffness and strength come from the filament's own data sheet (16 Bambu Lab and 23 Polymaker engineering filaments) or generic values for its type. Also new: a design check (too many filaments, hot and cool filaments on one bed, fibre filament on a soft nozzle, bodies thinner than the nozzle), print settings per body, and the filament cost. See the changelog.
New in 0.8: Send to PrusaSlicer prepares the project too: PrusaSlicer's own printers and prints (and the ones you saved yourself), a filament preset that fits the printer on every tool, each body on its tool, centred on the bed with the wipe tower beside it, and the print time and grams after sending. Your PrusaSlicer settings are not changed.
New in 0.7: filaments from the Open Filament Database bring their slicer settings: when your slicer has no preset for one, Filamatch makes it from the database's temperatures, fans and flow (and can save it in your slicer). The project uses the preset of the spool that is really loaded, and Home says when that spool is another filament than the design names. Filamatch reads the printer's nozzles (size, Standard or High Flow), shows them and warns when the print settings are for another size. The print estimate counts every plate, and bodies that touch keep their exact places. See the changelog.
New in 0.6: printers with several nozzles (Bambu Lab H2C, H3C, X2D, Prusa XL, CORE One INDX, and in 0.6.1 the Snapmaker U1) and Send to PrusaSlicer with each body on its extruder. These are checked in the slicers, not yet on the printers: see Printers for what is tested.
New in 0.5.1: after sending, Filamatch shows the print time and the grams of each filament, and checks that your spools have enough. Several spools of the same filament count together when AMS auto refill is on.
New in 0.5: send to the slicer you pick (Send to Orca, Send to Bambu); Bambu Studio prepares Bambu Lab projects by itself, without OrcaSlicer. Each filament stays on the nozzle its AMS slot feeds, purge volumes fit the real colours, and every export checks that each body has the filament it has in Fusion. See the changelog.
A multi-colour print usually goes like this: you design in Fusion, export a 3MF, open it in the slicer, and then assign a filament to every part again, by hand, every time. Filamatch keeps that information in the design:
- In Fusion you give each body a filament material (for example Bambu Lab · PLA Basic · Black). The model shows the real colour.
- Filamatch reads which filaments are loaded in your printer's AMS slots and matches each design filament to a slot.
- Send to Orca exports the design with each body already assigned to its slot, prepares the printer and process settings, and opens OrcaSlicer. The button names the slicer you pick in Settings, for example Send to Bambu.
In Fusion
- One palette with a live list of the filaments in the open design: body count, matched printer slot and a match badge (✓ match, ≈ close colour, "Not loaded"). Change a slot with one click.
- The list follows your changes: assigning a material, undo/redo and switching designs update it without a refresh button.
- A ready check before you send, with a fix button for each problem, for example when the printer's nozzle is another size than the print settings. It also checks the design: more filaments than the printer has slots or tools, filaments that cannot share one bed (ABS with PLA or PETG), carbon or glass fibre on a soft nozzle, and bodies thinner than the nozzle. Show selects the bodies in Fusion; so does a click on a filament's name.
- A note under a filament when its slot holds another filament than the design names ("≠ Loaded: PolyLite ABS"), with Use it to give the bodies the loaded filament in one click.
- Print settings per body: click a filament to see its bodies, then give one body, or all of them, their own infill %, infill type (only the types your slicer has), walls, top and bottom layers. Empty fields show the print process's values. The settings stay on the bodies and reach Bambu Studio, OrcaSlicer and PrusaSlicer as the body's own settings.
- Printed weight and strength: each body's weight as printed (walls, top and bottom layers and infill, or sliced for the exact grams). Turn on Fusion uses the printed values and each body gets an "as printed" copy of its filament with the printed density, stiffness and strength, for Fusion's mass and Simulation. Stiffness and strength come from the filament's own data sheet (Bambu Lab and Polymaker engineering filaments) or generic values for its type. Rough estimates, not design values.
Filaments
- Add filaments from three places: the spools on your printer, the bundled catalog, or a search of the community Open Filament Database.
- Each filament becomes a Fusion physical material with the right colour and density (so mass and weight estimates are correct), saved in your Fusion Favorites and in a "Filamatch Library" material library.
- Filaments from the database bring their slicer settings. When your slicer has no preset for one, Filamatch makes it from the slicer's generic preset for that type and printer, with the database's temperatures, fan speeds and flow ("addnorth ABS rABS @Bambu Lab H2D 0.4 nozzle" at 245 °C). The project carries it; with Save new filament presets in the slicer on, it is also saved as your own preset in Bambu Studio or OrcaSlicer.
Printer and slicer
- Any printer: set up a manual printer (nozzle and which filament is in each slot), for printers Filamatch cannot read, such as Prusa, Creality or Klipper printers.
- Reads the filaments loaded in your Bambu Lab printers: every AMS, AMS 2
Pro and AMS HT slot and the external spool, with the left and right nozzle
on an H2D. Several printers at once. Two ways to connect:
- directly to the printer on your network, with its IP address and access code from the printer screen. Tested in LAN-only mode; developer mode is not needed. Cloud mode on the same network should also work (Bambu still allows other apps to read the printer status), but it is not tested yet. Filamatch checks the printer's Bambu Lab certificate.
- or through Bambuddy, a self-hosted Bambu Lab printer manager. Slots with a Bambuddy inventory spool also show grams left.
- Filament names come from the filament id the printer reports, looked up in your installed Bambu Studio and OrcaSlicer presets (your own presets too). The prepared project uses the preset of the spool that is loaded (a PolyLite ABS spool gets "PolyLite ABS", even when the design says Bambu ABS).
- Reads the installed nozzles: size and, over the direct connection, Standard or High Flow. Home shows them, and the prepared project gets each nozzle's flow type, like Bambu Studio's printer sync.
- Prepares a complete OrcaSlicer project: printer, process and filament presets from your installed OrcaSlicer (or Bambu Studio) or downloaded from OrcaSlicer's profile collection. Picks a build plate and wipe tower position the filaments accept.
- Send to PrusaSlicer prepares a PrusaSlicer project the same way: PrusaSlicer's own printers and prints, a filament preset that fits the printer on every tool, each body on its tool, and the print estimate. Your PrusaSlicer settings are not changed.
- Opens the result in the slicer you pick, then shows the print time, grams and filament cost (from the slicer presets' prices) and checks the spools have enough left.
Under the hood
- Slow work (printer queries, profile downloads, the slicer run) happens in the background, so Fusion never freezes.
- The Bambuddy API key and the printer access codes are stored in the macOS Keychain or the Windows Credential Manager, never in a plain settings file.
- Printer connections only read. Filamatch never sends a command that moves, heats or prints.
- A standalone command-line tool adds slot metadata to any 3MF (see How it works).
| Autodesk Fusion | Current release, macOS or Windows. Filamatch uses Fusion's built-in Python; nothing else to install. |
| OrcaSlicer, Bambu Studio or PrusaSlicer | Prepares the project (print settings, slots, nozzles, purge volumes) and opens it; the send button names the one you pick. Bambu Studio prepares Bambu Lab printers by itself, PrusaSlicer 2.9.7 or newer the printers in its own lists; other printers need OrcaSlicer. Other slicers get the plain 3MF (SuperSlicer in PrusaSlicer's layout). Without a slicer you can still export a tagged 3MF. |
| A Bambu Lab printer (optional) | To read the filaments loaded in the printer. Connect it directly (IP address and access code from the printer screen) or through Bambuddy. See Printers for what is tested. Without a printer, an export puts the filaments in slots 1, 2, 3… in the order they appear in the design. Other printer brands are on the roadmap. |
Windows support is written but has been tested less than macOS.
Any printer works for the basics: Filamatch writes a 3MF in which each body already has its filament, and the slicer does the rest. Reading the loaded spools, choosing the nozzle for each filament and the spool check depend on the printer.
1. Tested and validated on a real printer:
| Printer | What is tested |
|---|---|
| Bambu Lab H2D (AMS 2 Pro, AMS HT) | Loaded spools (LAN-only mode and Bambuddy), Send to Orca (OrcaSlicer 2.5), Send to Bambu (Bambu Studio 2.9.1), each filament on the nozzle its AMS feeds, print estimate and spool check, installed nozzles (size and flow type over LAN), filament presets made from the Open Filament Database |
| Bambu Lab X1 Carbon (AMS) | Loaded spools, installed nozzle size |
2. Checked in the slicers with test files, not yet on a real printer:
| Printer | What is checked | Not tested |
|---|---|---|
| Bambu Lab H2C | Send to Bambu and Send to Orca prepare the project; Bambu Studio 2.9.1 opens it with each filament on its AMS side and slices it; the estimate works | Loaded spools, printing |
| Bambu Lab H3C | Send to Bambu prepares the project; Bambu Studio 2.9.1 opens it with its 9 nozzles and slices it; the estimate works. OrcaSlicer 2.5 cannot slice the H3C, so Filamatch refuses it | Loaded spools, printing |
| Bambu Lab X2D | Send to Bambu and Send to Orca prepare the project; Bambu Studio 2.9.1 opens it with each filament on its AMS side; the estimate works | Slicing in the app, loaded spools, printing; the "Main" / "Aux" side labels are not checked on a real printer |
| Prusa XL 5T | Send to Orca prepares the project with Prusa's filament presets; OrcaSlicer 2.5 opens and slices it; the estimate matches. Send to PrusaSlicer prepares it with PrusaSlicer 2.9.7's own presets and estimates it (command line) | Opening the PrusaSlicer project in the app, loaded spools (not read from Prusa printers), printing |
| Prusa CORE One INDX 4T / 8T, MMU3 | Send to Orca prepares the project and estimates it (OrcaSlicer 2.5 command line). Send to PrusaSlicer prepares and estimates the MK4 MMU3 and the CORE One (PrusaSlicer 2.9.7 command line) | Opening in the app; the INDX 8T estimate often fails because OrcaSlicer crashes; printing |
| Snapmaker U1 (0.4 nozzles, and 0.4 + 0.6 nozzles) | Send to Orca prepares the project with each body on its tool and estimates it (OrcaSlicer 2.5 command line). The 0.4 set gets Snapmaker's filament presets; the mixed set gets OrcaSlicer's generic ones, because Snapmaker's presets list only the 0.4 U1 | Opening in the app, the Snapmaker Orca app, loaded spools, printing |
| Any printer in PrusaSlicer | Send to PrusaSlicer prepares a full project from PrusaSlicer's own printer, print and filament presets, with each body on its tool and the print estimate (PrusaSlicer 2.9.7 command line: Prusa XL 5T, MK4 MMU3, CORE One); a send from Fusion opened in the PrusaSlicer 2.9.7 app with a printer preset of the owner's own (two tools); without preparing it keeps each body on its extruder (2.6.0 and 2.9.7) | Projects for Prusa printers opened in the PrusaSlicer app, other vendors' printers in PrusaSlicer, SuperSlicer, printing |
3. Expected to work, not tested yet:
- Other Bambu Lab printers with one nozzle and an AMS (P1S, P1P, A1, A1 mini, X1E, H2S, P2S): the same printer connection and slicer presets as the tested printers.
- Printers whose slicer is OrcaSlicer or based on it (for example Creality Print, ElegooSlicer, Anycubic Slicer Next, Snapmaker Orca, QIDI Studio): these use the same project layout, so the slots should be kept. Filamatch does not read the loaded spools of these printers yet.
Other tool changers (Klipper tool changers, IDEX printers) get the plain 3MF with each body's filament; Filamatch does nothing printer-specific for them yet.
The plan for multi-nozzle and tool-changer printers is in docs/design/multi-nozzle.md.
Do you own a printer that is not in the tested list? You can help add it:
- Open a printer support issue.
- The form asks for the printer model and firmware, your slicer and its version, the diagnostics report, a small project saved by your slicer with your printer selected, and (if you can) the printer's status report. Settings > Advanced > Save printer report in the palette writes that report for Bambu Lab printers, with private values removed.
- Remove serial numbers, access codes, IP addresses and API keys before you post anything.
A printer moves to the tested list when an owner has confirmed the full flow: loaded spools, send, slots in the slicer and the print.
- Download
Filamatch-<version>.zipfrom the releases page and unzip it. You get a folder namedFilamatch. - Move that folder into Fusion's add-ins folder:
- macOS:
~/Library/Application Support/Autodesk/Autodesk Fusion 360/API/AddIns/ - Windows:
%APPDATA%\Autodesk\Autodesk Fusion 360\API\AddIns\
- macOS:
- Restart Fusion. Filamatch starts by itself. Its button is on the UTILITIES tab, ADD-INS panel.
From a clone of this repository you can run the installer instead:
scripts/install_addin_macos.sh (macOS) or
powershell -ExecutionPolicy Bypass -File scripts\install_addin_windows.ps1 (Windows).
- Open a design and click Filamatch.
- The first time, connect your Bambu printer (IP address and access code from the printer's network settings), connect Bambuddy, or skip. You can change it later in Settings > Printer.
- Click + Add filaments and add the filaments you print with.
- In Fusion, give each body one of those materials (Physical Material, or Open Material Browser in the palette).
- Check the slots on Home, then click Send to Orca.
The user guide explains every screen.
Filamatch has no account, no analytics and no telemetry. It only connects to:
- your printers, at the IP addresses you enter (port 8883, encrypted);
- your Bambuddy server, at the address you enter;
- raw.githubusercontent.com, to download OrcaSlicer printer profiles you pick that are not installed locally;
- api.openfilamentdatabase.org, when you search online filaments.
Settings live in your user folder (see file locations). Filamatch writes into your slicer's own folders only when you turn on Save new filament presets in the slicer: it then adds filament presets to Bambu Studio's or OrcaSlicer's user presets and never replaces one.
- User guide: every screen, troubleshooting, slicer compatibility.
- How it works: architecture, 3MF metadata, file locations.
- Printed weight and strength: the mass model, the strength model and the filament data sheets with a link to each maker's sheet.
- Roadmap: planned features.
- Development: project layout, tests, releases.
- Changelog · Contributing
Filamatch is free and open source. If it saves you time, you can buy me a coffee:
Bug reports and test results from other printers help just as much: see CONTRIBUTING.
Filamatch is released under the MIT License. © 2026 Percosys.
- Filament data from the Open Filament Database (MIT), downloaded when you search.
- Printer profiles from OrcaSlicer (AGPL-3.0), downloaded when you pick a printer that is not installed; they are not part of this repository.
- Printer data from Bambuddy, when you connect it.
- Bambu Lab CA certificates (
Filamatch/data/bambu_ca.pem) from ha-bambulab (MIT), used to check that a printer is a real Bambu Lab printer.
Filamatch is an independent project. It is not made, endorsed or supported by Autodesk, Bambu Lab or the OrcaSlicer project. Autodesk and Fusion are trademarks of Autodesk, Inc.
