Skip to content

Add Herne Hill Velodrome as a built-in track - #75

Merged
pepperstm merged 1 commit into
mainfrom
feature/herne-hill
Nov 12, 2026
Merged

pepperstm merged 1 commit into
mainfrom
feature/herne-hill

Conversation

@pepperstm

@pepperstm pepperstm commented Nov 12, 2026 •

Copy link
Copy Markdown
Owner

What

Herne Hill Velodrome as a built-in track: the 450 m outdoor track in south London, at its real place, ridden in laps. It's on the home screen as "Herne Hill Velodrome", and ride setup asks which way round: anticlockwise as raced, or clockwise.

Builds on #68 (laps), now merged.

The track

  • The route is the measuring line, exactly 450 m from the finish line. That's on the home straight just north of the pavilion, as on the aerial photos. It's the same oval as OpenBikeNet's herne-hill-450 (Add Herne Hill Velodrome as a shared route, both ways round OpenBikeNet/protocol#6), so riders from other apps line up.
  • Banked 7° on the straights, rising to 26° in the bends. Riders lean with it.
  • Painted with the light-blue côte d'azur, the black, red and blue lines, the finish line, the 200 m line and the pursuit lines. The paint stays on the inside whichever way you ride.
  • A galvanised railing on a kerb round the outside, plain-coloured boards along the straights (no real brands), and floodlights with arms over the track.

The grounds

  • The pavilion: brick below, cedar above with the glazed club room, seating steps up to the terrace, dark columns, the wave roof curling over at the back, and the striped loop emblem on the south wall. No Olympic rings.
  • North of it: the bleachers, the club's containers, the white canopy on three masts, paving and a car park.
  • In the middle: the junior track, the hard standing, the path in, and the small shelter.
  • The ground is laid level and kept clear of trees and map buildings. Houses, roads and the railway round it come from the map as usual. No START/FINISH arches or village signs.

Checked

  • npm run check passes, with 6 new tests: lap length and start point, both directions, banking, the track look, no race barriers, level ground and an empty infield.
  • Checked a live preview in demo mode on both renderers, riding each way round (VP_SMOKE_ROUTE=herne-hill or herne-hill-clockwise).
  • Not yet ridden with a trainer.

Not sure about

  • The buildings are sized from OpenStreetMap and photos, so they're close but not surveyed.
  • The track is drawn round the measuring line, so it sits a few metres inside the real one. The buildings are placed by their distance from the drawn edge, so they still stand as close to it as they really do.

The 450 m track at its real place, ridden anticlockwise or clockwise: banked
from 7 to 26 degrees, painted with the cote d'azur and the measuring, sprinters'
and stayers' lines, with the finish, 200 m and pursuit lines across it. Round it
are the railing with plain boards, the floodlights, the pavilion, the bleachers,
the containers and canopy, and the junior track in the infield. The grounds are
levelled and kept clear of trees and map buildings.

The route matches OpenBikeNet's herne-hill-450. VP_SMOKE_ROUTE picks the route
for the smoke run.
@pepperstm pepperstm mentioned this pull request Nov 12, 2026
5 of 6 tasks
@pepperstm
pepperstm merged commit 606d6d9 into main Nov 12, 2026
6 checks passed
@pepperstm
pepperstm deleted the feature/herne-hill branch November 12, 2026 10:25
@pepperstm pepperstm mentioned this pull request Nov 12, 2026
pepperstm added a commit that referenced this pull request Nov 12, 2026
Version 0.3.10: laps (#68, by Rallensooo), Herne Hill Velodrome (#75), signposted road routes (#77), your Strava routes (#78), the Dreeve connector and pluggable connectors (#74, #83, by Jörn), remembered sensors (#79), smooth bends with lean (#81) and the Linux Bluetooth fix (#84).
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant