Skip to content

From this morning 11AM no connection anymore ... #452

Closed

Description

@phillipelauwych

Instellen mislukt, wordt opnieuw geprobeerd: Failed to validate data: 2 validation errors for list[ChargerFirmware] 0.AvailableVersion Field required [type=missing, input_value={'ChargerId': 'a82db78b-5...6.0.7', 'DeviceType': 4}, input_type=dict] For further information visit https://errors.pydantic.dev/2.13/v/missing 0.IsUpToDate Field required [type=missing, input_value={'ChargerId': 'a82db78b-5...6.0.7', 'DeviceType': 4}, input_type=dict] For further information visit https://errors.pydantic.dev/2.13/v/missing

Activity

  1. phillipelauwych commented on Nov 4, 2026

    @phillipelauwych
    Author

    Version 0.8.7 Zaptec is used en EV charger-firmware 6.0.7

  2. jonare77 commented on Nov 4, 2026

    @jonare77

    Same problem her:

    Logger: custom_components.zaptec.zaptec.validate
    Kilde: custom_components/zaptec/zaptec/validate.py:152
    Integrasjon: Zaptec EV charger
    Første forekomst: 21:08:26 (6 forekomster)
    Sist logget: 21:11:07
    
    Failed to validate chargerFirmware/installation/d390353d-18a7-4372-8c77-369459f7b598
    (pattern chargerFirmware/installation/[0-9a-f\-]+):
    
    2 validation errors for list[ChargerFirmware]
    
    0.AvailableVersion
    Field required [type=missing]
    
    0.IsUpToDate
    Field required [type=missing]
    
  3. GrasshopperNL commented on Nov 4, 2026

    @GrasshopperNL

    Same here

  4. thuben commented on Nov 4, 2026

    @thuben

    This is what I have, a dependency problem. The version of the pedantic package seems to br too limited!?

    Loggare: homeassistant.setup
    Källa: setup.py:272
    Inträffade först: 4 november 2026 kl. 23:49:27 (1 förekomst)
    Senast loggat: 4 november 2026 kl. 23:49:27

    Setup failed for custom integration 'zaptec': Requirements for zaptec not found: ['pydantic>=2.11.7,<2.14'].

    Loggare: homeassistant.util.package
    Källa: util/package.py:222
    Inträffade först: 4 november 2026 kl. 23:49:25 (3 förekomster)
    Senast loggat: 4 november 2026 kl. 23:49:27

    Unable to install package pydantic>=2.11.7,<2.14: error: No solution found when resolving dependencies cause: Because you require pydantic>=2.11.7,<2.14 and pydantic==2.14.1, we can conclude that your requirements are unsatisfiable.

  5. jonare77 commented on Nov 4, 2026

    @jonare77

    pydantic

    I think the pydantic error is because if the new 2026.11 version released today. Im still on 2026.10.4, and the error occured today, it references a firmware version field in the error. Also tried to change thr manifest file with no luck.

  6. EenerNL commented on Nov 5, 2026

    @EenerNL

    Same problem here since updating to 2026.11.

    Logger: homeassistant.setup
    Bron: setup.py:272
    Eerst voorgekomen: 4 november 2026 om 22:12:08 (1 gebeurtenis)
    Laatst gelogd: 4 november 2026 om 22:12:08
    
    Setup failed for custom integration 'zaptec': Requirements for zaptec not found: ['pydantic>=2.11.7,<2.14'].
    
    
  7. GrasshopperNL commented on Nov 5, 2026

    @GrasshopperNL

    Temporary workaround that works for me until a new release is out: edit
    /config/custom_components/zaptec/manifest.json and change the pydantic requirement to

    "pydantic>=2.11.7,<3"

    then restart Home Assistant. This matches what #451 proposes. The change will be overwritten by the next HACS update, which is fine once the fix is released.

    +1 for merging #451 and tagging a release.

  8. jonare77 commented on Nov 5, 2026

    @jonare77

    Temporary workaround that works for me until a new release is out: edit
    /config/custom_components/zaptec/manifest.json and change the pydantic requirement to

    "pydantic>=2.11.7,<3"

    then restart Home Assistant. This matches what #451 proposes. The change will be overwritten by the next HACS update, which is fine once the fix is released.

    +1 for merging #451 and tagging a release.

    My Zaptec stopped working yesterday and are still 2026.10.4, msnifest fix does nothing, seems like the firmware value returned by API contains something not accepted. What formware are ypu using?

  9. JohnnydeJong commented on Nov 5, 2026

    @JohnnydeJong

    Title: v0.8.7 fails to load on Home Assistant 2026.11.0 (pydantic 2.14.1) – please release the pydantic bump from #445

    Environment

    • Home Assistant OS 18.4, Core 2026.11.0 (Python 3.14.10)
    • Zaptec integration v0.8.7 (HACS)

    What happens
    After updating Home Assistant from 2026.10.4 to 2026.11.0, the integration no longer loads. HA shows "Invalid config: the following integrations and platforms could not be set up: zaptec". All Zaptec entities are unavailable.

    Log

    Cause
    HA 2026.11.0 ships pydantic 2.14.1. The v0.8.7 manifest pins pydantic>=2.11.7,<2.14.

    Fix already on master
    Commit 2c8a7ea "Bump pydantic, azure-servicebus and aiolimiter (#445)" (2026-10-20) changes the pin to pydantic>=2.11.7,<2.15. That change has not been released yet; v0.8.7 (2026-04-24) is still the latest release.

    Request
    Could you publish a release (v0.8.8) that includes #445, so users on HA 2026.11 can load the integration again without switching HACS to the master branch?

    Side effect worth noting
    Other integrations that rely on Zaptec sensors lose them silently. In my case a battery manager uses sensor.<charger>_charge_power to exclude the charger load. With the sensor unavailable, that exclusion is skipped and the home battery would discharge into the car.

    Thanks for maintaining this integration!

  10. StevetheV commented on Nov 7, 2026

    @StevetheV

    Temporary workaround that works for me until a new release is out: edit /config/custom_components/zaptec/manifest.json and change the pydantic requirement to

    "pydantic>=2.11.7,<3"

    then restart Home Assistant. This matches what #451 proposes. The change will be overwritten by the next HACS update, which is fine once the fix is released.

    This fixed it for me! Bedankt @GrasshopperNL

  11. jonare77 commented on Nov 7, 2026

    @jonare77

    Temporary workaround that works for me until a new release is out: edit /config/custom_components/zaptec/manifest.json and change the pydantic requirement to

    "pydantic>=2.11.7,<3"

    then restart Home Assistant. This matches what #451 proposes. The change will be overwritten by the next HACS update, which is fine once the fix is released.

    This fixed it for me! Bedankt @GrasshopperNL

    Didny work for me, i needed to change validate.py to get the firmware error resolved. Started the same day, but on version 2026.10.4 for me.

  12. sveinse commented on Nov 7, 2026

    @sveinse
    Collaborator

    v0.8.8 has been released. Please install and test.

  13. thuben commented on Nov 7, 2026

    @thuben

    V0.8.8 works for me! Thanks for the update!!!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    verificationWaiting for verification

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions