RunnersField

This is free a Data Field for the Fenix 3 that shows multiple values on a single field. RunnersField is open source and its code resides at github: https://github.com/kopa/RunnersField

Release versions are published in the Garmin App Store

===============================================

Feedback

https://forums.garmin.com/showthread.php?327411-DataFields-RunnersField

===============================================

Features

• TIME: 12/24h mode based on system settings.
• PACE: pace in km/min or mi/min based on system settings (as average of the last 10 values).
• AVG PACE: average pace over the whole activity.
• DISTANCE: elapsed distance in km or miles based on system settings.
• DURATION: duration of the activity in [hh:]mm:ss
• GPS: green/blue bars for poor/acceptable/good signal, gray if no signal.
• battery: visualization of battery percentage as indicator bar. If battery value is lower than 30 the indicator bar gets orange. If value is lower than 10% the exact value will be shown and the indicator bar turns red.
• unit system in use: "(km)" will be shown when metric system is set in the settings, "(mi)" if statute (imperial) units are configured.
• use bright or dark color scheme based on the background color setting of the app (Settings/Apps/Run/Background Color). needs at least a firmware with SDK 1.2 compatibility (otherwise bright scheme is always used).

===============================================

Install Instructions

A Data Field needs to be set up within the settings for a given activity (like Run)

• Long Press UP
• Settings
• Apps
• Run
• Data Screens
• Screen N
• Layout
• Select single field
• Field 1
• Select ConnectIQ Fields
• Select RunnersField
• Long Press Down to go back to watch face

===============================================

Usage

Start Run activity. Hopefully you see the RunnersField datafield and can read the values.

===============================================

Changelog 1.2.3

• fix app name

Changelog 1.2.2

• fix colorscheme background detection

Changelog 1.2.1

• change battery critical color

Changelog 1.2.0

• Use bright/dark color scheme based on app background color settings
• Add german language file

Changelog 1.1.1

• Further improved memory footprint

Changelog 1.1.0

• Redesign
• Improved memory footprint

Changelog 1.0.2

• Fix when black background is configured in device settings.
• Add battery percentage if it is lower than 10% left and make visualization red.
• Fix irrelevant slow pace values
• Change string TIMER to DURATION
• Change string metric to km and statute to miles

Changelog 1.0.1

• Time mode is now dependent on device settings (12/24 hours mode)
• Distance and pace will be presented dependent on device settings (metric [km, km/min] or statute [miles, miles/min]), "metric" or "statute" will be shown below battery/gps
• HR is now dark red to visually decipher the different values faster

Changelog 1.0.0

• Time of day
• Current Pace (average over 10 seconds)
• Average Pace
• Heart Rate
• Distance
• Timer
• Battery Status
• GPS Status (green = gps lock, red = no gps lock)