turing-pi-2

These are step-by-step instructions to configure a turing-pi-2 board with three Raspberry PI CM4 lite modules. The directories separate main functions, but you need to follow the sequence below for the initial configuration.

Start by learning about the board (optional but useful read)

-> go to https://docs.turingpi.com/docs

The board has several LEDs, see description at TuringBoard directory

Bring board to current firmware

-> go to TuringBoard/readme.md

Install the OS on the CM4 cards

-> go to RaspberryCM4/readme.md

You also find help on the hardware installation in the same directory

Install K3S

-> go to K3S/readme.md

Install Longhorn (WORK IN PROGRESS)

Install Prometheus and Karvana (WORK IN PROGRESS)

-> go to Monitoring/readme.md