Skip to content

Add NOVTAU filaments (24 lines, 260 colours) - #903

Merged
ofd-repo-bot[bot] merged 3 commits into
OpenFilamentCollective:mainfrom
JongLeeP:novtau-filaments
Nov 12, 2026
Merged

ofd-repo-bot[bot] merged 3 commits into
OpenFilamentCollective:mainfrom
JongLeeP:novtau-filaments

Conversation

@JongLeeP

@JongLeeP JongLeeP commented Nov 11, 2026 •

Copy link
Copy Markdown

Adds filaments for the NOVTAU brand (brand added in #899): 24 product lines, 260 colours, under PLA, PETG and ABS.

I work for NOVTAU (the manufacturer), so this data comes from our own catalogue.

What is included

  • ilament.json: name, density, diameter tolerance (±0.02 mm). Print temperatures are left out on purpose for now; we will add them with a data sheet.
  • �ariant.json: colour names and hex codes from our physical colour card, as shown on the product pages. Multi-colour (co-extruded / gradient) spools use a two-hex color_hex array. Traits only where the product line states them (matte, silk, translucent, glow, pearl, marble, wood, thermochromic, CF + abrasive, high flow, etc.).
  • sizes.json: 1.75 mm, 1000 g net filament, 145 g empty plastic spool, flange 200 mm, hole 54 mm, width 66 mm (same spool for every line).

Sources (one product page per line, colours listed on each):

python -m ofd validate passes with no errors and no warnings for data/novtau.

🤖 Generated with Claude Code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@github-actions

github-actions Bot commented Nov 11, 2026 •

Copy link
Copy Markdown
Contributor

Automated review of 3afc93f · how this works

NOVTAU brand PR adding 24 product lines (15 PLA, 8 PETG, 1 ABS) with sizes, variants and filament data. The tree holds 260 variant.json colours, not the 243 in the title and body, so the count needs correcting. Print temperatures and drying values were left empty; I found them on the brand's own pages and propose them in enrichments. No proofs or sustainability data are involved, and nothing is flagged as wrong.

  • 💬 15 suggestions on the diff

claude-haiku-5-5 · $0.06

Auto-merge: nothing holds it now, so it can merge on its own an hour after every other check is green and GitHub reports no conflicts (hold stops it). The Auto-merge check decides.

Maintainers: ✅ LGTM & merge · workflow run

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@JongLeeP

Copy link
Copy Markdown
Author

Thanks for the review.

  • Crystal Rainbow (4 colours): fixed in 1016699. Each one now has a hex array, taken from the colour-card photo of that spool, with the gradual_color_change trait.
  • Colours on the product pages that aren't in this PR (PLA Tough+, PLA Glow, PLA Basic Gradient, a few PLA Matte): these are on the pages, but we don't have a photo of the physical colour card for them yet, so there is no measured hex. We left them out rather than guess. We'll add them in a follow-up PR once the swatches are photographed.

🤖 Generated with Claude Code

@github-actions github-actions Bot left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

AI review: see the summary comment.

"id": "pla_basic",
"name": "PLA Basic",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 210 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 45 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 50 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 210,
"max_print_temperature": 230,
"min_bed_temperature": 45,
"max_bed_temperature": 60,
"dry_temperature": 50

"id": "pla_matte",
"name": "PLA Matte",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_silk_plus",
"name": "PLA Silk+",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_translucent",
"name": "PLA Translucent",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_tough_plus",
"name": "PLA Tough+",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 30 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 30,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_photochromic",
"name": "PLA Photochromic",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_thermochromic",
"name": "PLA Thermochromic",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_matte_multi_color",
"name": "PLA Matte Multi-Color",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "petg_basic",
"name": "PETG Basic",
"diameter_tolerance": 0.02,
"density": 1.27

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 240 (medium, source)
  • /max_print_temperature = 270 (medium, source)
  • /min_bed_temperature = 65 (medium, source)
  • /max_bed_temperature = 75 (medium, source)
  • /dry_temperature = 65 (medium, source)
  • /dry_time = 8 (medium, source)
Suggested change
"density": 1.27
"density": 1.27,
"min_print_temperature": 240,
"max_print_temperature": 270,
"min_bed_temperature": 65,
"max_bed_temperature": 75,
"dry_temperature": 65,
"dry_time": 8

"id": "abs",
"name": "ABS",
"diameter_tolerance": 0.02,
"density": 1.04

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 245 (medium, source)
  • /max_print_temperature = 265 (medium, source)
  • /min_bed_temperature = 90 (medium, source)
  • /max_bed_temperature = 100 (medium, source)
  • /dry_temperature = 70 (medium, source)
  • /dry_time = 6 (medium, source)
  • /enclosure = "recommended" (medium, source)
Suggested change
"density": 1.04
"density": 1.04,
"min_print_temperature": 245,
"max_print_temperature": 265,
"min_bed_temperature": 90,
"max_bed_temperature": 100,
"dry_temperature": 70,
"dry_time": 6,
"enclosure": "recommended"

@JongLeeP

Copy link
Copy Markdown
Author

Added 17 more NOVTAU colours that were left out earlier: Tough+ (7), Glow (4), Basic Gradient (2) and Matte (4). Hex values were sampled from our own product photos of each spool, using the same method as the Crystal Rainbow fix. Happy to adjust any value.

@github-actions github-actions Bot left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

AI review: see the summary comment.

"id": "pla_matte",
"name": "PLA Matte",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_silk_plus",
"name": "PLA Silk+",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_translucent",
"name": "PLA Translucent",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_tough_plus",
"name": "PLA Tough+",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_silk_multi_color",
"name": "PLA Silk Multi-Color",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_photochromic",
"name": "PLA Photochromic",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_thermochromic",
"name": "PLA Thermochromic",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "pla_matte_multi_color",
"name": "PLA Matte Multi-Color",
"diameter_tolerance": 0.02,
"density": 1.24

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 190 (high, source)
  • /max_print_temperature = 230 (high, source)
  • /min_bed_temperature = 25 (high, source)
  • /max_bed_temperature = 60 (high, source)
  • /dry_temperature = 55 (high, source)
  • /dry_time = 6 (high, source)
Suggested change
"density": 1.24
"density": 1.24,
"min_print_temperature": 190,
"max_print_temperature": 230,
"min_bed_temperature": 25,
"max_bed_temperature": 60,
"dry_temperature": 55,
"dry_time": 6

"id": "petg_basic",
"name": "PETG Basic",
"diameter_tolerance": 0.02,
"density": 1.27

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 240 (medium, source) (Read from the product page via a summarising fetch; the wording may differ slightly from the page text.)
  • /max_print_temperature = 270 (medium, source)
  • /min_bed_temperature = 65 (medium, source)
  • /max_bed_temperature = 75 (medium, source)
  • /dry_temperature = 65 (medium, source)
  • /dry_time = 8 (medium, source)
Suggested change
"density": 1.27
"density": 1.27,
"min_print_temperature": 240,
"max_print_temperature": 270,
"min_bed_temperature": 65,
"max_bed_temperature": 75,
"dry_temperature": 65,
"dry_time": 8

"id": "abs",
"name": "ABS",
"diameter_tolerance": 0.02,
"density": 1.04

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Found by the bot; check the source before committing:

  • /min_print_temperature = 245 (medium, source) (Read from the product page via a summarising fetch; the wording may differ slightly from the page text.)
  • /max_print_temperature = 265 (medium, source)
  • /min_bed_temperature = 90 (medium, source)
  • /max_bed_temperature = 100 (medium, source)
  • /dry_temperature = 70 (medium, source)
  • /dry_time = 6 (medium, source)
Suggested change
"density": 1.04
"density": 1.04,
"min_print_temperature": 245,
"max_print_temperature": 265,
"min_bed_temperature": 90,
"max_bed_temperature": 100,
"dry_temperature": 70,
"dry_time": 6

@JongLeeP JongLeeP changed the title Add NOVTAU filaments (24 lines, 243 colours) Add NOVTAU filaments (24 lines, 260 colours) Nov 12, 2026
@ofd-repo-bot
ofd-repo-bot Bot merged commit bc66cd8 into OpenFilamentCollective:main Nov 12, 2026
13 checks passed
@ofd-repo-bot

ofd-repo-bot Bot commented Nov 12, 2026

Copy link
Copy Markdown
Contributor

LGTM! Thanks for the contribution, it'll be up on SP and the dataset at about 00:00 Danish time :D

Auto-merged: 547 new entries passed the validators and the AI review; see the Auto-merge check.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants