Skip to content

Baseplates: a corner boss stands out past a rounded plate corner #86

Open

Description

@Oliver-Johnson

With corner pockets (bm=bosses), the square corner boss at a rounded outer corner of the plate stands out past the corner's arc. The plate's outline is rounded but the boss isn't, so a square tab 2.6 mm tall (the boss's full default height) pokes out of each rounded corner.

Page: #pi=42&w=84&d=84&mm=none&bw=256&bd=256&cn=none&bm=bosses&mg=1

All four corners stand 1.66 mm out past the arc, and the plate builds with Download on.

How far out: r(√2 − 1) at outer radius r. That is 1.66 mm at the default radius 4, 0.83 at 2 and 1.99 at 4.8. It is the same at every pitch (measured at 34.5, 42 and 60 mm).

Which corners: rounded outer corners with no margin or a small one.

  • With 0.5 mm margins the boss is 0.95 mm out.
  • The boss stays inside once both margins pass 1.17 mm, or once the other margin reaches 4 mm when one margin is 0.
  • The default page has no bosses, and corner pockets on the default drawer have 6 and 1 mm margins, so no default plate shows it.
  • Picking "No margin" on the default drawer with corner pockets does: A1 is 1.66 mm out and A2 0.47.

Found while reviewing #84 and confirmed on main at 88fef25. #84 doesn't change it.

Activity

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Labels

bugSomething isn't working

Projects

No projects

    Milestone

    No milestone

    Relationships

    None yet

    Development

    No branches or pull requests

    Issue actions