release: promote 2026-Q3 to master

.github/workflows/build.yml

@@ -78,6 +78,7 @@ jobs:
           # Keep the current repo LAST.
           $buildOrder = @(
             'SAM'
+            'SAM_Mollier'
             $repo
           )
 
@@ -140,6 +141,7 @@ jobs:
           # Same build order as above (keep repo LAST)
           $buildOrder = @(
             'SAM'
+            'SAM_Mollier'
             $repo
           )
 
@@ -160,7 +162,43 @@ jobs:
             & msbuild $sln /t:Rebuild @common
           }
 
+      - name: Test SAM.Analytical.Systems.Tests
+        shell: pwsh
+        run: |
+          $ErrorActionPreference = 'Stop'
+
+          # The capability/template conformance suite must EXECUTE in CI, not merely compile. It is the
+          # only thing that checks CapabilityIndex.JSON against the shipped SystemEnergyCentre templates -
+          # that every template is accounted for, that a heat-recovery claim matches an exchanger in the
+          # file, and that no template models a summer bypass. A drifted index is otherwise invisible
+          # until it silently selects the wrong system for a dwelling.
+          #
+          # Targeted rather than a solution-wide `dotnet test`: this repo's other test project is already
+          # covered by its own history, and the conformance suite reads the repository's own resources
+          # from source, so it must run from the checkout rather than from a build output.
+          $project = Join-Path '${{ env.REPO_NAME }}' 'SAM.Analytical.Systems.Tests\SAM.Analytical.Systems.Tests.csproj'
+          if (-not (Test-Path $project)) { throw "Conformance test project not found: $project" }
+
+          # --no-build would need a matching Release layout; the solution Rebuild above already produced
+          # the dependencies this references, so a plain build here is cheap and avoids a config mismatch.
+          # /p:SAMVersion MATTERS. Three SAM_Systems projects write to the same build\ folder the artifact
+          # step publishes, so a test build without it recompiles them at the 1.0.0.0 local-dev fallback
+          # and silently overwrites the CI-stamped DLLs - shipping version-inconsistent assemblies.
+          & dotnet test $project -c Release "-p:SAMVersion=${{ steps.ver.outputs.samversion }}" --logger 'trx;LogFileName=SAM.Analytical.Systems.Tests.trx' --results-directory 'TestResults'
+          if ($LASTEXITCODE -ne 0) { throw "SAM.Analytical.Systems.Tests failed." }
+
+      - name: Upload test results
+        if: always()
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ env.REPO_NAME }}-test-results
+          path: TestResults/*.trx
+          if-no-files-found: warn
+
       - name: Upload build folders (optional)
+        # always(): a failing test must not also cost the build artifacts, which are what you need to
+        # diagnose it.
+        if: always()
         uses: actions/upload-artifact@v4
         with:
           name: ${{ env.REPO_NAME }}-build-folders

.gitignore

@@ -26,6 +26,7 @@ bld/
 [Oo]bj/
 [Ll]og/
 [Bb]uild/
+build_tests/
 
 # Visual Studio 2015/2017 cache/options directory
 .vs/

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemAddSystemEnergyCentre.cs

@@ -1,4 +1,7 @@
-using Grasshopper.Kernel;
+// SPDX-License-Identifier: LGPL-3.0-or-later
+// Copyright (c) 2020-2026 Michal Dengusiak & Jakub Ziolkowski and contributors
+
+using Grasshopper.Kernel;
 using SAM.Analytical.Grasshopper.Systems.Properties;
 using SAM.Core.Grasshopper;
 using SAM.Core.Grasshopper.Systems;
@@ -32,7 +35,11 @@ public class SAMAnalyticalSystemAddSystemEnergyCentre : GH_SAMVariableOutputPara
         /// </summary>
         public SAMAnalyticalSystemAddSystemEnergyCentre()
           : base("SAMAnalytical.AddSystemEnergyCentre", "SAMAnalytical.AddSystemEnergyCentre",
-              "Adds SystemEnergyCentre",
+              "Attaches a SystemEnergyCentre to a SAM AnalyticalModel.\n" +
+              "\n" +
+              "The energy centre (the building's air systems and plantrooms) is stored on the analytical\n" +
+              "model so it travels with the model through later steps and into simulation. The updated\n" +
+              "analytical model is returned together with the energy centre that was attached.",
               "SAM", "Systems")
         {
         }
@@ -45,8 +52,8 @@ protected override GH_SAMParam[] Inputs
             get
             {
                 List<GH_SAMParam> result = new List<GH_SAMParam>();
-                result.Add(new GH_SAMParam(new GooAnalyticalModelParam() { Name = "_analyticalModel", NickName = "_analyticalModel", Description = "SAM AnalyticalModel", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemEnergyCentreParam() { Name = "_systemEnergyCentre_", NickName = "systemEnergyCentre", Description = "SAM SystemEnergyCentre", Optional = true, Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooAnalyticalModelParam() { Name = "_analyticalModel", NickName = "_analyticalModel", Description = "The SAM AnalyticalModel to attach the energy centre to. A copy is returned with the energy centre stored on it.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemEnergyCentreParam() { Name = "_systemEnergyCentre_", NickName = "systemEnergyCentre", Description = "The SAM SystemEnergyCentre (air systems + plantrooms) to store on the analytical model.\n\nOptional: if omitted, any energy centre already present on the model is kept.", Optional = true, Access = GH_ParamAccess.item }, ParamVisibility.Binding));
                 return result.ToArray();
             }
         }
@@ -59,8 +66,8 @@ protected override GH_SAMParam[] Outputs
             get
             {
                 List<GH_SAMParam> result = new List<GH_SAMParam>();
-                result.Add(new GH_SAMParam(new GooAnalyticalModelParam() { Name = "analyticalModel", NickName = "analyticalModel", Description = "SAM AnalyticalModel", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemEnergyCentreParam() { Name = "systemEnergyCentre", NickName = "systemEnergyCentre", Description = "SAM SystemEnergyCentre", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooAnalyticalModelParam() { Name = "analyticalModel", NickName = "analyticalModel", Description = "The SAM AnalyticalModel with the SystemEnergyCentre stored on it.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemEnergyCentreParam() { Name = "systemEnergyCentre", NickName = "systemEnergyCentre", Description = "The SystemEnergyCentre that was attached to the analytical model.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
                 return result.ToArray();
             }
         }

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemComponentType.cs

@@ -1,4 +1,7 @@
-using SAM.Analytical.Grasshopper.Systems.Properties;
+// SPDX-License-Identifier: LGPL-3.0-or-later
+// Copyright (c) 2020-2026 Michal Dengusiak & Jakub Ziolkowski and contributors
+
+using SAM.Analytical.Grasshopper.Systems.Properties;
 using SAM.Analytical.Systems;
 using SAM.Core.Grasshopper;
 using System;
@@ -27,7 +30,10 @@ public class SAMAnalyticalSystemComponentType : GH_SAMEnumComponent<AnalyticalSy
         /// </summary>
         public SAMAnalyticalSystemComponentType()
           : base("SAM.AnalyticalSystemComponentType", "SAM.AnalyticalSystemComponentType",
-              "AnalyticalSystemComponentType",
+              "Selects an analytical air-handling component type (e.g. cooling coil, heating coil, fan,\n" +
+              "exchanger, humidifier) from a drop-down list.\n" +
+              "\n" +
+              "Use it to drive type-dependent logic or to filter/identify components by type.",
               "SAM", "Systems")
         {
         }

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemConnectedSensor.cs

@@ -35,7 +35,10 @@ public class SAMAnalyticalSystemConnectedSensor : GH_SAMVariableOutputParameterC
         /// </summary>
         public SAMAnalyticalSystemConnectedSensor()
           : base("SAMAnalytical.ConnectedSensor", "SAMAnalytical.ConnectedSensor",
-              "Gets Connected SystemSensor",
+              "Finds the SystemSensor that a given system controller reads from, within a plantroom.\n" +
+              "\n" +
+              "A controller references a sensor by id; this component resolves that reference and returns the\n" +
+              "actual SystemSensor object from the plantroom so it can be inspected or rewired.",
               "SAM", "Systems")
         {
         }
@@ -48,8 +51,8 @@ protected override GH_SAMParam[] Inputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "SystemPlantRoom", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "_systemController", NickName = "_systemController", Description = "System Controller", Access = GH_ParamAccess.item}, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "The SAM SystemPlantRoom that contains the controller and its sensor.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "_systemController", NickName = "_systemController", Description = "The system controller whose referenced sensor should be resolved.", Access = GH_ParamAccess.item}, ParamVisibility.Binding));
 
                 return [.. result];
             }
@@ -63,7 +66,7 @@ protected override GH_SAMParam[] Outputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemSensor", NickName = "systemSensor", Description = "System Sensor", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemSensor", NickName = "systemSensor", Description = "The SystemSensor referenced by the controller (the sensor it reads its measured value from).", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
                 return [.. result];
             }
         }

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemConnectedSystemComponents.cs

@@ -35,7 +35,11 @@ public class SAMAnalyticalSystemConnectedSystemComponents : GH_SAMVariableOutput
         /// </summary>
         public SAMAnalyticalSystemConnectedSystemComponents()
           : base("SAMAnalytical.ConnectedSystemComponents", "SAMAnalytical.ConnectedSystemComponents",
-              "Gets Connected System Components",
+              "Gets the components directly connected to a given component along a system.\n" +
+              "\n" +
+              "Starting from one component, this returns its immediate neighbours on the chosen system (e.g. an\n" +
+              "AirSystem) - those one step upstream (In), one step downstream (Out), or both when no direction\n" +
+              "is given. Use it to walk the connectivity of a plantroom one hop at a time.",
               "SAM", "Systems")
         {
         }
@@ -48,10 +52,10 @@ protected override GH_SAMParam[] Inputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "SystemPlantRoom", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new Core.Grasshopper.Systems.GooSystemParam() { Name = "_system", NickName = "_system", Description = "System", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "_systemComponent", NickName = "_systemComponent", Description = "System Component", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new global::Grasshopper.Kernel.Parameters.Param_String() { Name = "direction_", NickName = "direction_", Description = "Flow Direction", Access = GH_ParamAccess.item, Optional = true }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "The SAM SystemPlantRoom whose connectivity is queried.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new Core.Grasshopper.Systems.GooSystemParam() { Name = "_system", NickName = "_system", Description = "The system whose connections to follow (e.g. an AirSystem or LiquidSystem). A component can belong to several systems; this selects which network to traverse.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "_systemComponent", NickName = "_systemComponent", Description = "The component to find the neighbours of.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new global::Grasshopper.Kernel.Parameters.Param_String() { Name = "direction_", NickName = "direction_", Description = "Flow direction to search: \"In\" (upstream) or \"Out\" (downstream).\n\nOptional: leave empty to return neighbours in both directions.", Access = GH_ParamAccess.item, Optional = true }, ParamVisibility.Binding));
 
                 return [.. result];
             }
@@ -65,7 +69,7 @@ protected override GH_SAMParam[] Outputs
             get
             {
                 List<GH_SAMParam> result = new List<GH_SAMParam>();
-                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "systemComponents", NickName = "systemComponents", Description = "System Components", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "systemComponents", NickName = "systemComponents", Description = "The components directly connected to the input component along the chosen system and direction(s).", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
                 return [.. result];
             }
         }

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemConnectedSystemGroups.cs

@@ -34,7 +34,10 @@ public class SAMAnalyticalSystemConnectedSystemGroups : GH_SAMVariableOutputPara
         /// </summary>
         public SAMAnalyticalSystemConnectedSystemGroups()
           : base("SAMAnalytical.ConnectedSystemGroups", "SAMAnalytical.ConnectedSystemGroups",
-              "Gets Connected System Components",
+              "Gets the system groups that a given component belongs to within a plantroom.\n" +
+              "\n" +
+              "System groups are logical groupings of components (e.g. an air-handling unit). This returns every\n" +
+              "group related to the supplied component.",
               "SAM", "Systems")
         {
         }
@@ -47,8 +50,8 @@ protected override GH_SAMParam[] Inputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "SystemPlantRoom", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "_systemComponent", NickName = "_systemComponent", Description = "System Component", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "The SAM SystemPlantRoom that holds the component and its groups.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemComponentParam() { Name = "_systemComponent", NickName = "_systemComponent", Description = "The component whose owning system groups should be returned.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
 
                 return [.. result];
             }
@@ -62,7 +65,7 @@ protected override GH_SAMParam[] Outputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemGroups", NickName = "systemGroups", Description = "System Groups", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemGroups", NickName = "systemGroups", Description = "The system groups the component belongs to.", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
                 return [.. result];
             }
         }

Grasshopper/SAM.Analytical.Grasshopper.Systems/Component/SAMAnalyticalSystemConnectedSystemObjects.cs

@@ -34,7 +34,10 @@ public class SAMAnalyticalSystemConnectedSystemObjects : GH_SAMVariableOutputPar
         /// </summary>
         public SAMAnalyticalSystemConnectedSystemObjects()
           : base("SAMAnalytical.ConnectedSystemObjects", "SAMAnalytical.ConnectedSystemObjects",
-              "Gets Connected System Components",
+              "Gets every system object related to a given object within a plantroom.\n" +
+              "\n" +
+              "Returns all objects (components, connections, systems, sensors, groups, etc.) that the supplied\n" +
+              "object is related to - a general-purpose way to discover what an object touches in the plantroom.",
               "SAM", "Systems")
         {
         }
@@ -47,8 +50,8 @@ protected override GH_SAMParam[] Inputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "SystemPlantRoom", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
-                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "_systemObject", NickName = "_systemObject", Description = "System Object", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemPlantRoomParam() { Name = "_systemPlantRoom", NickName = "_systemPlantRoom", Description = "The SAM SystemPlantRoom whose relationships are queried.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "_systemObject", NickName = "_systemObject", Description = "The system object whose related objects should be returned.", Access = GH_ParamAccess.item }, ParamVisibility.Binding));
 
                 return [.. result];
             }
@@ -62,7 +65,7 @@ protected override GH_SAMParam[] Outputs
             get
             {
                 List<GH_SAMParam> result = [];
-                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemObjects", NickName = "systemObjects", Description = "System Objects", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
+                result.Add(new GH_SAMParam(new GooSystemObjectParam() { Name = "systemObjects", NickName = "systemObjects", Description = "All system objects related to the supplied object.", Access = GH_ParamAccess.list }, ParamVisibility.Binding));
                 return [.. result];
             }
         }