You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository was archived by the owner on Nov 3, 2026. It is now read-only.
Stephan Mühl edited this page Sep 7, 2022
·
24 revisions
Receive Buttonstates
SmartPusher publish the button states via MQTT to following topics: [prefix]/button[x]/click [prefix]/button[x]/double_click [prefix]/button[x]/long_click [prefix]/button[x]/push (only in pushmode)
while [prefix] is "SmartPusher" by default and [x] represents the number of the pressed button (1-8)
Control LEDs
If you set the LED Mode to extern youre able to control the LED state of each button by yourself.
Topic [prefix]/button[x]/state Payload 0 = Off 1 = On 2 = Fade
Brightness
You can set the brightness of your smartpusher. This will control the OLED and button leds. Topic [prefix]/brightness Payload
Number from 0-255. 0 will turn off the oled and button leds.
Render Text
Youre able to send a text to the OLED display to show a response from your Smarthome Topic [prefix]/message Payload
The text you want to render
The Message will scroll vertically if it not fit
Render Image
You can render your own image on the SmartPusher OLED
create a 128x64 image in your favorite photo editor like Photoshop, GIMP, Paint etc.
and save it as a .png file. e.g. test.png
Download the png2bin converter and copy your png file to the same directory.
open a terminal and use it like png2bin [source-PNG] [destination-bin]
e.g. png2bin test.png test.bin
open a webbrowser and navigate to [SmartPusher-IP]/files
Then upload your .bin file to the SmartPusher flash memory
Without a reboot you can show the image by publish to the image topic. Topic [prefix]/image Payload
name of the bin file without extension (e.g. test)