diff --git a/docs/getting-started/installing/from-gui/usage.en.md b/docs/getting-started/installing/from-gui/usage.en.md
index 6f28d6bd8..1bd95f9fa 100644
--- a/docs/getting-started/installing/from-gui/usage.en.md
+++ b/docs/getting-started/installing/from-gui/usage.en.md
@@ -1,251 +1,90 @@
-This guide will walk through the basic use of the installer. At startup, it can differ in some
-operational systems. In the rest, the procedures will be similar.
+# Usage
-### Main Menu
-When executing the **Krux-Installer**, you will be presented with a menu of 4 enabled buttons and
-two disabled buttons:
+Krux Installer bundles one version of the Krux firmware and can flash your
+device offline. Use USB flashing for the first installation or to reinstall
+after a [Wipe device](#wipe-device) procedure. For subsequent firmware updates,
+we recommend the [air-gapped update](#air-gapped-update) using a microSD card.
-
+To flash a different firmware version over USB, download an
+[installer release](https://github.com/selfcustody/krux-installer/releases) that
+bundles it or follow the [manual installation instructions](../from-pre-built-release.md).
-* Enabled buttons:
- * `Version`: select a firmware version;
-
- * `Device`: select a supported device for the selected version;
-
- * `Settings`: change some application settings;
-
- * `About`: just show some information about the application.
+## Main menu
-* Disabled buttons:
+Open Krux Installer, read the disclaimer, and click **I understand** to continue.
+On Linux, the installer may ask for permission to access the USB serial port.
+Follow the on-screen instructions if prompted.
- * `Flash firmware`: This button will start the flash firmware procedure;
-
- * It will be enabled when user select **both** version and device;
-
- * `Wipe device`: This button will start the wipe device procedure.
-
- * It will be enabled when user select the device.
+
-#### Kivy Fatal Error - OpenGL
-Our latest version uses Kivy and requires at least OpenGL version 2.0, if you encounter this error, try installing the [OpenCL™, OpenGL®, and Vulkan® Compatibility Pack](https://apps.microsoft.com/detail/9nqpsl29bfff) from Microsoft.
+**Flash firmware** and **Wipe device** become available after you select a device.
+You can open **Settings** and **About** from the main menu at any time.
-
+### Kivy Fatal Error - OpenGL
-### Select version
+Krux Installer uses Kivy and requires OpenGL 2.0 or later. On Windows, if the
+installer shows an OpenGL error, try installing the
+[OpenCL™, OpenGL®, and Vulkan® Compatibility Pack](https://apps.microsoft.com/detail/9nqpsl29bfff)
+from Microsoft.
-At startup, the application will setup it to the latest one, `{{latest_krux}}`. But you can select
-even a beta release or older versions:
-
-
+
-* Click in the button that show the text `Version: {{latest_krux}}`;
+## Select device
-* To select a beta release, click on button that show the text `odudex/krux_binaries`;
+Click **Device: select a new one**, then choose your device model. The installer
+returns to the main menu with the selected model next to **Device**.
-* To select an older version, click on button that show the text `Old versions`;
+
-#### Beta release
+Models unavailable for the bundled firmware are dimmed.
-After choose `odudex/krux_binaries`, you'll be warned with a message:
+## Flash device
-
+1. Connect your device to the computer with a USB data cable and turn it on.
+2. Confirm that the model shown next to **Device** matches your hardware, then
+ click **Flash firmware**.
+3. Leave the USB cable connected and the device powered on until the installer
+ displays **DONE**. Do not disconnect it while flashing.
-#### Older versions
+
-* We put this option in case you have any interest in the history of firmware development;
+The installer checks the bundled firmware against its build-time SHA256 hash
+before flashing.
-
-
-* Each version supports one device or the other;
-
-* For example: the version `v22.03.0` has support only for `m5stickv`.
-
-
-### Settings
-
-**Krux-Installer** will give to you some freedom of choices for:
-
-* Krux-Installer settings;
-
-* General settings;
-
-#### Krux-Installer specific settings
-
-Here you can configure some of the specifics of krux firmare, like:
-
-
-
-* Where you'll save downloaded assets;
-
-* The flash baudrate
-
-* The natural language that will be used in the application ([system locale](https://en.wikipedia.org/wiki/Locale_(computer_software))).
-
-##### Flash baudrate
-The flash baudrate is how quickly the firmware will be written to the device.
-
-
-
-Use one of the following (m5StickV doesn't support 2000000): 9600, 19200, 28800, 38400, 57600, 76800, 115200,
-230400, 460800, 576000, 921600, 1500000, 2000000.
-
-##### System locale
-
-At startup, **Krux-Installer** recognize the locale used in your system. If your language isn't supported, it will defaults to `en_US`.
-
-
-
-
-### Select Device
-
-Everytime you select a new version, you'll see that the device button will be
-reseted to `Device: select a new one` state. Once a version is selected you can choose a device
-on which the firmware will be written.
-
-First, select the device we want to flash. After that the menu will shown three items:
-
-
-
-Note that some devices may be disabled if they are not supported by the chosen version
-
-### Flash device
-
-Once you choose the device and version, it enables the "flash device" button. It will start an
-**automatic** process of:
-
-* For official firmware's releases:
-
- * Warning;
-
- * Download;
-
- * Verification:
-
- * Unzip the correct firmware;
-
- * Flash:
-
- * The flash itself via USB;
-
- * Air-gapped update via SD card;
-
-
-* For beta releases:
-
- * Download asset;
-
- * The flash itself;
-
-#### Warning
-
-If you already downloaded assets, you'll be warned about this and will be offered the possibility
-to download again or continue without downloading:
-
-
-
-#### Download
-
-**Krux-Installer** download can download four assets for official releases or one for beta releases.
-
-##### Official releases
-
-* A `zip` file containing all firmwares for each device;
-
-* Download a `zip.sha256.txt` file containing a `zip`'s digital fingerprint;
-
-* Download a `zip.sig` file containing a `zip`'s digital signature;
-
-* Download the `selfcustody.pem` file containing a public key certificate, signed by `odudex`;
-
-
-
-##### Beta releases
-
-* A `kfpkg` file containing the specific firmware for choosen device;
-
-#### Verification
-
-* Integrity verification compares the computed hash of `zip` against thei provided `zip.sha256.txt`;
-
-* Authenticity verification check if the `zip` file was really signed by `odudex`, using
-the `zip.sig` and `selfcustody.pem`.
-
-
-
-
-#### Unzip
-
-Now you will be able to select if you do a flash process or need to do an airgap process:
-
-
-
-Click on [Flash with](#flash-with) to install via USB or [Air-gapped update with](#air-gapped-update-with) to perform upgrades via an SD card.
-
-#### Flash with
-
-When flash starts, it will warn you to **not disconnect the device until the process is complete**.
-You'll be able to see the flash progress:
-
-
-> ⚠️ TIP: You must connect and turn on your device **before click extract and flashing starts!**.
-
-As well a done icon:
-
-
-
-> ⚠️ TIP:
----8<----
flash-krux-logo.en.txt
----8<----
+### Error flashing
-##### Error flashing
-
-If **Krux-Installer** shows a **flash failed** error or freezes at **PLEASE DO NOT UNPLUG YOUR DEVICE** with the message **INFO Trying to Enter K210 ROM ISP Mode…**, it means the installer couldn’t establish a proper connection to the device. See the [troubleshooting](/krux/troubleshooting/#error-when-flashing) section for guidance on how to fix this.
-
-
-#### Air-gapped update with
-
-Once you've installed the initial firmware on your device via USB, you can perform further firmware upgrades via SD card to keep the device airgapped.
-
-
-> ⚠️ Click on "Air-gapped update with"
-
-Once the `firmware.bin` and `firmware.bin.sig` are extracted, you'll see a warning message.
-
-
-
-Insert the SD card and click 'Proceed' to allow the installer to detect it.
-
-
-> ⚠️ If a single SD card is inserted, the screen will display a large button. If multiple removable drives are detected, both SD cards and other drives will be listed.
-
-Select the desired removable drive to copy both `firmware.bin` and `firmware.bin.sig.` The first is the Krux firmware, and the second is a signature file that verifies the firmware’s integrity and authenticity.
-
-Now you can compare the firmware's hash computed by installer with the firmware's hash computed by the device.
+If flashing fails or stalls while trying to enter K210 ROM ISP mode, see
+[Error when flashing](../../../troubleshooting.md#error-when-flashing).
-
-> ⚠️ Once files are copied, remove the SD card from computer, connect to device and compare the hashes
+### Air-gapped update
-### Wipe device
+After the initial USB installation, follow the
+[microSD card update guide](../../features/sd-card-update.md) to update firmware
+without connecting the device to a computer over USB.
-This is a two step process, **Warning msg** and **Wipe process**.
+## Settings
-#### Warning
+Open **Settings** to change **Flash baudrate**, which controls how fast firmware
+is written over USB, or **Locale**, which changes the installer language.
-Before the wipe starts, it will show to you a message:
+
-
-> ⚠️ TIP: It's useful when your device is not working or for security reasons.
-To use Krux again, you'll need to re-flash the firmware.
+## Wipe device
-#### Wipe
+Wiping permanently erases saved data and removes the firmware. Back up any
+wallet recovery information you need before proceeding.
-Once the process starts, the screen will appear frozen and a spinner will keep moving.
-When it's done, you can scroll down you will see a `check` icon.
+1. Connect the device over USB and select its model.
+2. Click **Wipe device** and read the warning. Click **Proceed** to start the wipe.
+3. Leave the USB cable connected and the device powered on until the installer
+ displays **DONE**. Do not disconnect it while wiping. Disconnect
+ and reconnect it before flashing the firmware again.
-
-> ⚠️ TIP: Do not unplug or poweroff your device or computer. Wait until the process finishes.
+
----8<----
tips-after-install.en.txt
diff --git a/docs/img/krux-installer/app_settings.png b/docs/img/krux-installer/app_settings.png
index b5f897647..6d19e5919 100644
Binary files a/docs/img/krux-installer/app_settings.png and b/docs/img/krux-installer/app_settings.png differ
diff --git a/docs/img/krux-installer/device_selected.png b/docs/img/krux-installer/device_selected.png
new file mode 100644
index 000000000..a1230add5
Binary files /dev/null and b/docs/img/krux-installer/device_selected.png differ
diff --git a/docs/img/krux-installer/main.png b/docs/img/krux-installer/main.png
index e22fba1f8..57d4641c1 100644
Binary files a/docs/img/krux-installer/main.png and b/docs/img/krux-installer/main.png differ
diff --git a/docs/img/krux-installer/select_device.png b/docs/img/krux-installer/select_device.png
index e1bed277a..fb1268bb8 100644
Binary files a/docs/img/krux-installer/select_device.png and b/docs/img/krux-installer/select_device.png differ
diff --git a/docs/img/krux-installer/wipe_warn.png b/docs/img/krux-installer/wipe_warn.png
index 62f1e5076..05d9eeb4f 100644
Binary files a/docs/img/krux-installer/wipe_warn.png and b/docs/img/krux-installer/wipe_warn.png differ