diff --git a/packages/control/chargepoint/chargepoint.py b/packages/control/chargepoint/chargepoint.py
index db95b7666c..a26b402769 100644
--- a/packages/control/chargepoint/chargepoint.py
+++ b/packages/control/chargepoint/chargepoint.py
@@ -558,6 +558,10 @@ def check_min_max_current(self, required_current: float, phases: int) -> float:
                     required_current = self.data.get.max_discharge_power / phases / 230
                     msg = f"Die vom Auto übertragene Entladeleistung begrenzt den Strom auf " \
                         f"maximal {round(required_current, 2)} A."
+                # eigene Hardware-Stromgrenze des Ladepunkts auch beim Entladen durchsetzen, nicht nur
+                # beim Laden - check_cp_max_current() behandelt negative Werte bereits korrekt
+                # (Vorzeichen wird ueber abs()/sign wieder hergestellt).
+                required_current = self.check_cp_max_current(required_current, phases)
             else:
                 if self.data.get.max_charge_power / phases / 230 < required_current:
                     required_current = self.data.get.max_charge_power / phases / 230
diff --git a/packages/control/chargepoint/chargepoint_test.py b/packages/control/chargepoint/chargepoint_test.py
index 57a746649b..c7a036e363 100644
--- a/packages/control/chargepoint/chargepoint_test.py
+++ b/packages/control/chargepoint/chargepoint_test.py
@@ -5,6 +5,8 @@
 
 from control import data
 from control.chargelog import chargelog
+from control.chargemode import Chargemode
+from control.chargepoint.charging_type import ChargingType
 from control.chargepoint.chargepoint import Chargepoint
 from control.chargepoint.chargepoint_state import ChargepointState
 from control.chargepoint.chargepoint_template import CpTemplate
@@ -66,6 +68,33 @@ def test_check_min_max_current(required_current, phases, expected_required_curre
     assert ret == expected_required_current
 
 
+@pytest.mark.parametrize("required_current, max_discharge_power, dc_max_current, expected_required_current",
+                         [
+                             pytest.param(-50, -30000, 25, -25,
+                                          id="Entladung durch CP-Hardwaregrenze begrenzt"),
+                             pytest.param(-10, -30000, 25, -10,
+                                          id="Entladung innerhalb der CP-Hardwaregrenze"),
+                         ])
+def test_check_min_max_current_bidi_discharge_respects_cp_hardware_limit(
+        required_current, max_discharge_power, dc_max_current, expected_required_current):
+    """ Beim Entladen (BIDI_CHARGING, required_current < 0) muss die eigene Hardware-Stromgrenze des
+    Ladepunkts (dc_max_current) genauso durchgesetzt werden wie beim Laden - vor diesem Fix wurde
+    check_cp_max_current() im Entlade-Zweig gar nicht aufgerufen (siehe #3795). """
+    # setup
+    cp = Chargepoint(0, None)
+    cp.template = CpTemplate()
+    cp.template.data.charging_type = ChargingType.DC.value
+    cp.template.data.dc_max_current = dc_max_current
+    cp.data.control_parameter.submode = Chargemode.BIDI_CHARGING
+    cp.data.get.max_discharge_power = max_discharge_power
+
+    # evaluation
+    ret = cp.check_min_max_current(required_current, 1)
+
+    # assertion
+    assert ret == expected_required_current
+
+
 @dataclass
 class Params:
     name: str
diff --git a/packages/control/counter.py b/packages/control/counter.py
index 4266315049..3e9634ea46 100644
--- a/packages/control/counter.py
+++ b/packages/control/counter.py
@@ -210,7 +210,12 @@ def _set_current_left(self, loadmanagement_available: bool) -> None:
                         load.data.get.currents)
                 except KeyError:
                     element_current = [get_medium_charging_current(load.data.get.currents)]*3
-                if min(element_current) < 0:
+                # Vorzeichen anhand der Gesamtleistung entscheiden, nicht anhand einzelner Phasenströme
+                # (min(element_current) < 0): bei ein-/zweiphasigem Laden zeigen ungenutzte Phasen oft ein
+                # geringes negatives Messrauschen (zB -0.05A), das sonst den ganzen Load faelschlich als
+                # Einspeisung einordnet - der eigene Ladestrom wird dann nirgends von currents_raw
+                # abgezogen und das Lastmanagement haelt die eigene Ladung faelschlich fuer Fremdlast.
+                if load.data.get.power < 0:
                     # nur Hausverbraucher ohne Einspeisung
                     currents_exported_raw = list(map(operator.sub, currents_exported_raw, element_current))
                 else:
diff --git a/packages/control/counter_test.py b/packages/control/counter_test.py
index 640b38fb85..b8550a815a 100644
--- a/packages/control/counter_test.py
+++ b/packages/control/counter_test.py
@@ -111,6 +111,30 @@ def test_set_current_left(loadmanagement_available: bool,
     assert counter.data.set.raw_currents_left == expected_raw_currents_left
 
 
+def test_set_current_left_nets_out_own_current_despite_noise_on_unused_phase(monkeypatch, data_):
+    """ Ein einphasig ladender Ladepunkt zeigt auf ungenutzten Phasen oft ein geringes negatives
+    Messrauschen (zB -0.05A). min(element_current) < 0 hat das faelschlich als Einspeisung eingeordnet,
+    wodurch der eigene Ladestrom nirgends von currents_raw abgezogen wurde - das Lastmanagement hielt
+    die eigene Ladung dann faelschlich fuer Fremdlast (siehe Matts Log in Discussion #3908)."""
+    # setup
+    get_loads_of_counter_mock = Mock(return_value=["cp4"])
+    monkeypatch.setattr(data.data.counter_all_data, "get_loads_of_counter", get_loads_of_counter_mock)
+    data.data.cp_data["cp4"].data.config.phase_1 = 1
+    data.data.cp_data["cp4"].data.get.currents = [20, 0.05, -0.05]
+    data.data.cp_data["cp4"].data.get.power = 4600
+    counter = Counter(0)
+    counter.data.config.max_currents = [35]*3
+    counter.data.config.max_total_power = 35*3*230
+    counter.data.config.max_power_errorcase = 7000
+    counter.data.get.currents = [10, -5, -3]
+
+    # execution
+    counter._set_current_left(True)
+
+    # evaluation
+    assert counter.data.set.raw_currents_left == [45, 40.05, 37.95]
+
+
 @dataclass
 class Params:
     name: str