diff --git a/.deploy/helm/eupf/README.md b/.deploy/helm/eupf/README.md
index ec628603..0b1a20d6 100644
--- a/.deploy/helm/eupf/README.md
+++ b/.deploy/helm/eupf/README.md
@@ -19,7 +19,7 @@ The default values produce a working pod: eUPF is configured via `UPF_*` environ
   kubelet --allowed-unsafe-sysctls 'net.ipv4.ip_forward'
   ```
 
-- **Privileges**: eUPF loads eBPF programs, mounts bpffs/debugfs (via the image entrypoint) and raises `RLIMIT_MEMLOCK`. By default the chart runs the container as `privileged: true`. If your environment allows a finer-grained setup, override `securityContext`, e.g.:
+- **Privileges**: eUPF loads eBPF programs, mounts bpffs/debugfs (via the image entrypoint) and raises `RLIMIT_MEMLOCK`. By default the chart gives the container the capabilities this takes and nothing more:
 
   ```yaml
   securityContext:
@@ -27,6 +27,13 @@ The default values produce a working pod: eUPF is configured via `UPF_*` environ
       add: [NET_ADMIN, SYS_ADMIN, SYS_RESOURCE, BPF, PERFMON]
   ```
 
+  The container keeps the device cgroup, the masked `/proc` and `/sys` paths and the runtime's seccomp and AppArmor profiles. Some environments deny the entrypoint's mounts even with `SYS_ADMIN`: nodes whose AppArmor profile forbids `mount` (the runtime's default profile on Ubuntu and Debian does), a custom seccomp profile that blocks `mount` or `bpf`, or a runtime that rejects `BPF` and `PERFMON` on a kernel before 5.8. There, either allow the mounts (for AppArmor: `securityContext.appArmorProfile: {type: Unconfined}` on Kubernetes 1.30+, the `container.apparmor.security.beta.kubernetes.io/eupf: unconfined` pod annotation before) or fall back to a privileged container:
+
+  ```yaml
+  securityContext:
+    privileged: true
+  ```
+
 - The `/sys` hostPath is mounted read-only into the pod (required by the entrypoint to mount bpffs/debugfs).
 
 ## Configuration
diff --git a/.deploy/helm/eupf/templates/NOTES.txt b/.deploy/helm/eupf/templates/NOTES.txt
index 834050d1..5fdffd9d 100644
--- a/.deploy/helm/eupf/templates/NOTES.txt
+++ b/.deploy/helm/eupf/templates/NOTES.txt
@@ -24,6 +24,7 @@ eUPF is configured via a ConfigMap (config.enabled=true), mounted at
 Notes:
 - Nodes must allow the unsafe sysctl net.ipv4.ip_forward
   (kubelet --allowed-unsafe-sysctls='net.ipv4.ip_forward').
-- The container runs privileged by default (eBPF data plane requires it);
-  see the chart README for a capabilities-based alternative.
+- The container runs with the capabilities the eBPF data plane needs
+  (NET_ADMIN, SYS_ADMIN, SYS_RESOURCE, BPF, PERFMON), not privileged; see the
+  chart README for the environments that need the privileged fallback.
 - The REST API is served on port {{ .Values.service.port }} (service port "http").
diff --git a/.deploy/helm/eupf/values.yaml b/.deploy/helm/eupf/values.yaml
index 2a845eb6..740a17b7 100644
--- a/.deploy/helm/eupf/values.yaml
+++ b/.deploy/helm/eupf/values.yaml
@@ -223,13 +223,18 @@ podSecurityContext:
     - name: net.ipv4.ip_forward
       value: "1"
 
-# eUPF loads eBPF programs, mounts bpffs/debugfs and raises RLIMIT_MEMLOCK,
-# which requires elevated privileges. If your environment allows it, a more
-# fine-grained alternative is:
-#   capabilities:
-#     add: [NET_ADMIN, SYS_ADMIN, SYS_RESOURCE, BPF, PERFMON]
+# eUPF loads eBPF programs (BPF, PERFMON), attaches XDP and sets routes
+# (NET_ADMIN), raises RLIMIT_MEMLOCK (SYS_RESOURCE) and mounts bpffs/debugfs
+# from the image entrypoint (SYS_ADMIN). These capabilities are all it needs;
+# the container keeps the device cgroup, the masked /proc and /sys paths and
+# the runtime's seccomp and AppArmor profiles. Where the mounts are denied
+# anyway (an AppArmor profile that forbids mount, a seccomp profile that
+# blocks mount or bpf, a runtime that does not know CAP_BPF on a kernel
+# before 5.8), fall back to a privileged container:
+#   privileged: true
 securityContext:
-  privileged: true
+  capabilities:
+    add: [NET_ADMIN, SYS_ADMIN, SYS_RESOURCE, BPF, PERFMON]
 
 extraContainerPorts:
   - name: metrics
diff --git a/.trivyignore b/.trivyignore
index c5486963..5c15ca27 100644
--- a/.trivyignore
+++ b/.trivyignore
@@ -16,11 +16,17 @@ AVD-KSV-0030
 AVD-KSV-0106
 AVD-KSV-0117
 
-# eUPF data plane requires a privileged (root) container to load eBPF
-# programs, mount bpffs/debugfs and raise RLIMIT_MEMLOCK - running with
-# a restricted security context is not supported by design.
+# The eUPF data plane runs as root with the capabilities it needs (NET_ADMIN,
+# SYS_ADMIN, SYS_RESOURCE, BPF, PERFMON) to load eBPF programs, mount
+# bpffs/debugfs and raise RLIMIT_MEMLOCK - a restricted security context is
+# not supported by design.
 AVD-KSV-0118
 
+# SYS_ADMIN is what the image entrypoint mounts bpffs and debugfs with; the
+# other capabilities are a smaller grant than the privileged container the
+# chart ran before, which had every capability and no runtime profile.
+AVD-KSV-0005
+
 # The eUPF data plane needs a read-only /sys hostPath mount: the image
 # entrypoint mounts bpffs and debugfs under /sys to load the eBPF
 # programs. A "disallowed volume type" (hostPath) is by design here.