Skip to content

Commit e238390

Browse files
tannewttannewt
authored
Merge pull request #10820 from NHBSystems/jl401-s3
Add board support for JL401-S3 datalogger
2 parents 9ec417c + c65f289 commit e238390

5 files changed

Lines changed: 179 additions & 0 deletions

File tree

‎ports/espressif/boards/nhbsystems_jl401_4mbflash_2mbpsram/board.c‎

Lines changed: 26 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,26 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#include "supervisor/board.h"
8+
#include "mpconfigboard.h"
9+
#include "shared-bindings/microcontroller/Pin.h"
10+
#include "driver/gpio.h"
11+
12+
void board_init(void) {
13+
reset_board();
14+
}
15+
16+
void reset_board(void) {
17+
// Turn on I2C power by default.
18+
gpio_set_direction(14, GPIO_MODE_DEF_OUTPUT);
19+
gpio_set_level(14, true);
20+
21+
// Turn on SD power by default
22+
gpio_set_direction(3, GPIO_MODE_DEF_OUTPUT);
23+
gpio_set_level(3, true);
24+
}
25+
26+
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

‎ports/espressif/boards/nhbsystems_jl401_4mbflash_2mbpsram/mpconfigboard.h‎

Lines changed: 36 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,36 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#pragma once
8+
9+
// Micropython setup
10+
11+
#define MICROPY_HW_BOARD_NAME "NHB Systems JL401-S3 4MB Flash 2MB PSRAM"
12+
#define MICROPY_HW_MCU_NAME "ESP32S3"
13+
14+
#define MICROPY_HW_NEOPIXEL (&pin_GPIO1)
15+
#define CIRCUITPY_STATUS_LED_POWER (&pin_GPIO2)
16+
17+
// #define MICROPY_HW_LED_STATUS (&pin_GPIO13)
18+
19+
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO48)
20+
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO47)
21+
22+
#define DEFAULT_SPI_BUS_SCK (&pin_GPIO12)
23+
#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO11)
24+
#define DEFAULT_SPI_BUS_MISO (&pin_GPIO13)
25+
26+
#define DEFAULT_UART_BUS_RX (&pin_GPIO18)
27+
#define DEFAULT_UART_BUS_TX (&pin_GPIO17)
28+
29+
#define DOUBLE_TAP_PIN (&pin_GPIO38)
30+
31+
#define DEFAULT_SD_SCK (&pin_GPIO12)
32+
#define DEFAULT_SD_MOSI (&pin_GPIO11)
33+
#define DEFAULT_SD_MISO (&pin_GPIO13)
34+
#define DEFAULT_SD_CS (&pin_GPIO10)
35+
#define DEFAULT_SD_CARD_DETECT (&pin_GPIO9)
36+
#define DEFAULT_SD_CARD_INSERTED true

‎ports/espressif/boards/nhbsystems_jl401_4mbflash_2mbpsram/mpconfigboard.mk‎

Lines changed: 14 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,14 @@
1+
USB_VID = 0x303A
2+
USB_PID = 0x834A
3+
USB_PRODUCT = "NHB Systems JL401-S3 4MB Flash 2MB PSRAM"
4+
USB_MANUFACTURER = "NHB Systems"
5+
6+
IDF_TARGET = esp32s3
7+
8+
CIRCUITPY_ESP_FLASH_SIZE = 4MB
9+
CIRCUITPY_ESP_FLASH_MODE = qio
10+
CIRCUITPY_ESP_FLASH_FREQ = 80m
11+
12+
CIRCUITPY_ESP_PSRAM_SIZE = 2MB
13+
CIRCUITPY_ESP_PSRAM_MODE = qio
14+
CIRCUITPY_ESP_PSRAM_FREQ = 80m

‎ports/espressif/boards/nhbsystems_jl401_4mbflash_2mbpsram/pins.c‎

Lines changed: 89 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,89 @@
1+
// This file is part of the CircuitPython project: https://circuitpython.org
2+
//
3+
// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
4+
//
5+
// SPDX-License-Identifier: MIT
6+
7+
#include "shared-bindings/board/__init__.h"
8+
9+
static const mp_rom_map_elem_t board_module_globals_table[] = {
10+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
11+
12+
{ MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
13+
{ MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
14+
{ MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
15+
16+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO1) },
17+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL_POWER), MP_ROM_PTR(&pin_GPIO2) },
18+
19+
{ MP_ROM_QSTR(MP_QSTR_SD_PWR), MP_ROM_PTR(&pin_GPIO3)},
20+
{ MP_ROM_QSTR(MP_QSTR_D3), MP_ROM_PTR(&pin_GPIO3) },
21+
{ MP_ROM_QSTR(MP_QSTR_D4), MP_ROM_PTR(&pin_GPIO4) },
22+
23+
{ MP_ROM_QSTR(MP_QSTR_D5), MP_ROM_PTR(&pin_GPIO5) },
24+
{ MP_ROM_QSTR(MP_QSTR_D6), MP_ROM_PTR(&pin_GPIO6) },
25+
26+
{ MP_ROM_QSTR(MP_QSTR_D7), MP_ROM_PTR(&pin_GPIO7) },
27+
28+
{ MP_ROM_QSTR(MP_QSTR_A5), MP_ROM_PTR(&pin_GPIO8) },
29+
{ MP_ROM_QSTR(MP_QSTR_D8), MP_ROM_PTR(&pin_GPIO8) },
30+
{ MP_ROM_QSTR(MP_QSTR_D9), MP_ROM_PTR(&pin_GPIO9) },
31+
32+
33+
// { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO13) },
34+
// { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO13) },
35+
36+
{ MP_ROM_QSTR(MP_QSTR_I2C_POWER), MP_ROM_PTR(&pin_GPIO14) },
37+
{ MP_ROM_QSTR(MP_QSTR_A4), MP_ROM_PTR(&pin_GPIO14) },
38+
{ MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
39+
40+
{ MP_ROM_QSTR(MP_QSTR_A3), MP_ROM_PTR(&pin_GPIO15) },
41+
{ MP_ROM_QSTR(MP_QSTR_D15), MP_ROM_PTR(&pin_GPIO15) },
42+
43+
{ MP_ROM_QSTR(MP_QSTR_A2), MP_ROM_PTR(&pin_GPIO16) },
44+
{ MP_ROM_QSTR(MP_QSTR_D16), MP_ROM_PTR(&pin_GPIO16) },
45+
46+
{ MP_ROM_QSTR(MP_QSTR_A1), MP_ROM_PTR(&pin_GPIO17) },
47+
{ MP_ROM_QSTR(MP_QSTR_D17), MP_ROM_PTR(&pin_GPIO17) },
48+
49+
{ MP_ROM_QSTR(MP_QSTR_A0), MP_ROM_PTR(&pin_GPIO18) },
50+
{ MP_ROM_QSTR(MP_QSTR_D18), MP_ROM_PTR(&pin_GPIO18) },
51+
52+
{ MP_ROM_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO21) },
53+
54+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO10) },
55+
{ MP_ROM_QSTR(MP_QSTR_D10), MP_ROM_PTR(&pin_GPIO10) },
56+
57+
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO11) },
58+
{ MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
59+
60+
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_GPIO12) },
61+
{ MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
62+
63+
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO13) },
64+
{ MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO13) },
65+
66+
// D33 to D36 used for AD7124 SPI
67+
{ MP_ROM_QSTR(MP_QSTR_D33), MP_ROM_PTR(&pin_GPIO33) },
68+
{ MP_ROM_QSTR(MP_QSTR_D34), MP_ROM_PTR(&pin_GPIO34) },
69+
{ MP_ROM_QSTR(MP_QSTR_D35), MP_ROM_PTR(&pin_GPIO35) },
70+
{ MP_ROM_QSTR(MP_QSTR_D36), MP_ROM_PTR(&pin_GPIO36) },
71+
72+
{ MP_ROM_QSTR(MP_QSTR_D37), MP_ROM_PTR(&pin_GPIO37) },
73+
// { MP_ROM_QSTR(MP_QSTR_D38), MP_ROM_PTR(&pin_GPIO38) },
74+
{ MP_ROM_QSTR(MP_QSTR_D39), MP_ROM_PTR(&pin_GPIO39) },
75+
76+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
77+
{ MP_ROM_QSTR(MP_QSTR_D43), MP_ROM_PTR(&pin_GPIO43) },
78+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
79+
{ MP_ROM_QSTR(MP_QSTR_D44), MP_ROM_PTR(&pin_GPIO44) },
80+
81+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO47) },
82+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO48) },
83+
84+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
85+
{ MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
86+
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
87+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }
88+
};
89+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/espressif/boards/nhbsystems_jl401_4mbflash_2mbpsram/sdkconfig‎

Lines changed: 14 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,14 @@
1+
#
2+
# Espressif IoT Development Framework Configuration
3+
#
4+
#
5+
# Component config
6+
#
7+
#
8+
# LWIP
9+
#
10+
# end of LWIP
11+
12+
# end of Component config
13+
14+
# end of Espressif IoT Development Framework Configuration

0 commit comments

Comments
 (0)