Merge pull request #153 from brentru/add-pyportal-mqtts

Add PyPortal MQTTS Example

Author: brentru

examples/adafruitio_secure_pyportal/.esp8266.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_secure_pyportal/.zero.test.skip

@@ -0,0 +1 @@
+

examples/adafruitio_secure_pyportal/adafruitio_secure_pyportal.ino

@@ -0,0 +1,167 @@
+/***************************************************
+  Adafruit MQTT Library PyPortal Adafruit IO SSL/TLS Example
+
+  Must use the latest version of nina-fw from:
+    https://github.com/adafruit/nina-fw
+
+  Adafruit PyPortal: https://www.adafruit.com/product/4116
+
+  Adafruit invests time and resources providing this open source code,
+  please support Adafruit and open-source hardware by purchasing
+  products from Adafruit!
+
+  Written by Brent Rubell for Adafruit Industries.
+  MIT license, all text above must be included in any redistribution
+ ****************************************************/
+#include <WiFiNINA.h>
+#include <SPI.h>
+#include "Adafruit_MQTT.h"
+#include "Adafruit_MQTT_Client.h"
+
+/************************* WiFi Access Point *********************************/
+
+#define WLAN_SSID "WLAN_SSID"
+#define WLAN_PASS "WLAN_PASSWORD"
+int keyIndex = 0; // your network key Index number (needed only for WEP)
+
+int status = WL_IDLE_STATUS;
+/************************* Adafruit.io Setup *********************************/
+
+#define AIO_SERVER "io.adafruit.com"
+// Using port 8883 for MQTTS
+#define AIO_SERVERPORT 8883
+// Adafruit IO Account Configuration
+// (to obtain these values, visit https://io.adafruit.com and click on Active Key)
+#define AIO_USERNAME "YOUR_ADAFRUIT_IO_USERNAME"
+#define AIO_KEY "YOUR_ADAFRUIT_IO_KEY"
+
+/************ Global State (you don't need to change this!) ******************/
+
+// WiFiSSLClient for SSL/TLS support
+WiFiSSLClient client;
+
+// Setup the MQTT client class by WLAN_PASSing in the WiFi client and MQTT server and login details.
+Adafruit_MQTT_Client mqtt(&client, AIO_SERVER, AIO_SERVERPORT, AIO_USERNAME, AIO_KEY);
+/****************************** Feeds ***************************************/
+
+// Setup a feed called 'test' for publishing.
+// Notice MQTT paths for AIO follow the form: <username>/feeds/<feedname>
+Adafruit_MQTT_Publish test = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/test");
+
+/*************************** Sketch Code ************************************/
+
+void setup()
+{
+  //Initialize serial and wait for port to open:
+  Serial.begin(115200);
+  while (!Serial)
+  {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // check for the WiFi module:
+  if (WiFi.status() == WL_NO_MODULE)
+  {
+    Serial.println("Communication with WiFi module failed!");
+    // don't continue
+    while (true)
+      ;
+  }
+
+  String fv = WiFi.firmwareVersion();
+  if (fv < "1.0.0")
+  {
+    Serial.println("Please upgrade the firmware");
+  }
+
+  // attempt to connect to WiFi network:
+  while (status != WL_CONNECTED)
+  {
+    Serial.print("Attempting to connect to WLAN_SSID: ");
+    Serial.println(WLAN_SSID);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
+    status = WiFi.begin(WLAN_SSID, WLAN_PASS);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  }
+  Serial.println("Connected to wifi");
+  printWiFiStatus();
+}
+
+uint32_t x = 0;
+
+void loop()
+{
+  // Ensure the connection to the MQTT server is alive (this will make the first
+  // connection and automatically reconnect when disconnected).  See the MQTT_connect
+  // function definition further below.
+  MQTT_connect();
+
+  // Now we can publish stuff!
+  Serial.print(F("\nSending val "));
+  Serial.print(x);
+  Serial.print(F(" to test feed..."));
+  if (!test.publish(x++))
+  {
+    Serial.println(F("Failed"));
+  }
+  else
+  {
+    Serial.println(F("OK!"));
+  }
+
+  // wait a couple seconds to avoid rate limit
+  delay(2000);
+}
+
+// Function to connect and reconnect as necessary to the MQTT server.
+// Should be called in the loop function and it will take care if connecting.
+void MQTT_connect()
+{
+  int8_t ret;
+
+  // Stop if already connected.
+  if (mqtt.connected())
+  {
+    return;
+  }
+
+  Serial.print("Connecting to MQTT... ");
+
+  uint8_t retries = 3;
+  while ((ret = mqtt.connect()) != 0)
+  { // connect will return 0 for connected
+    Serial.println(mqtt.connectErrorString(ret));
+    Serial.println("Retrying MQTT connection in 5 seconds...");
+    mqtt.disconnect();
+    delay(5000); // wait 5 seconds
+    retries--;
+    if (retries == 0)
+    {
+      // basically die and wait for WDT to reset me
+      while (1)
+        ;
+    }
+  }
+
+  Serial.println("MQTT Connected!");
+}
+
+void printWiFiStatus()
+{
+  // print the SSID of the network you're attached to:
+  Serial.print("SSID: ");
+  Serial.println(WiFi.SSID());
+
+  // print your board's IP address:
+  IPAddress ip = WiFi.localIP();
+  Serial.print("IP Address: ");
+  Serial.println(ip);
+
+  // print the received signal strength:
+  long rssi = WiFi.RSSI();
+  Serial.print("signal strength (RSSI):");
+  Serial.print(rssi);
+  Serial.println(" dBm");
+}

library.properties

@@ -1,5 +1,5 @@
 name=Adafruit MQTT Library
-version=0.20.4
+version=1.0.0
 author=Adafruit
 maintainer=Adafruit <info@adafruit.com>
 sentence=MQTT library that supports the FONA, ESP8266, Yun, and generic Arduino Client hardware.