Charging speed depending on battery level

[elhennig]

Is there an option the charge the battery only slowly after reaching a certain battery level. I only found how to set the charging current in general and limit it to a certain value.
I have a scenario in mind to charge the battery until 75% rapidly if possible and the limit the current to a rather low value like 300-500 mA. Is that already doable?

[VR-25]

While there's no dedicated mechanism for that, it's fairly simple to set up.
Share your config.txt file after setting your regular current limit.

[elhennig]

This is the config I use.
acc_config.txt

[VR-25]

I was expecting to see a current limit setting there.

Anyway...
After setting your regular limit, e.g., acc -sc 2000 (2000 mA), find the line maxChargingCurrent=(...) in your config and add the following line below it:

: limit current to 500 mA at 75%; [ $(cat ${battCapacity:-//NULL} 2>/dev/null || echo 75) -lt 75 ] || maxChargingCurrent=(YOUR CANGES HERE)

Essentially, you're going to replace all instances of 2000 with 500.

[elhennig]

I did not impose any limit, yet. Sorry. This is what I used different chargers for ;-)

Anyway you config seems to work, at least most of the times, sometimes the values seem to be higher than the configured value

[VR-25]

It's a kernel/hardware limitation. Some values/devices work better than others.