diff --git a/CHANGELOG.md b/CHANGELOG.md
index b96683a..15bc7d1 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -1,5 +1,11 @@
 # Changelog
 
+## 0.60.0-test3 — Roof bars and upper back-tower spots
+
+- Adds eight individually addressable LED bars along the stage roof, evenly placed between the existing washes.
+- Adds one spot above the beam row on each of the eight mirrored back towers.
+- Carries forward test2's individual bar-cell dimmers and colours, plus the balanced show and local debug feedback.
+
 ## 0.60.0-test2 — Independently programmed LED bars
 
 - Every batten has twelve independently set dimmer and colour cells, still rendered in one batch.
diff --git a/docs/sv-recovery-plan.md b/docs/sv-recovery-plan.md
index 07e5a5e..c020c60 100644
--- a/docs/sv-recovery-plan.md
+++ b/docs/sv-recovery-plan.md
@@ -180,6 +180,12 @@ Lever per stap één onveranderlijke lokale kandidaat met een kleine, duidelijke
 - De barpatronen omvatten aangehouden 50/50-vlakken, even/oneven cellen, midden, uiteinden en een langzaam verplaatsend venster. Afwisselende kleuren volgen het bestaande showpalet en monochrome scènes blijven monochroom.
 - `tools/test_bar_pixels.gd` controleert het aantal cellen, patroonvormen, determinisme en de gebatchte renderstructuur.
 
+## Uitgevoerd in kandidaat 0.60.0-test3
+
+- Acht roof-bars vullen de gelijk verdeelde openingen op de tweede rooftruss, naast de roof spots en washes.
+- Elke back tower heeft een vierde kop boven de bestaande drie beams, als spot voor een aanvullende rol.
+- De show-tests controleren tellingen en spiegeling van beide uitbreidingen.
+
 ## Resterende uitvoering
 
-Volgende stappen zijn de visuele beoordeling van pixelbars en towergeometrie, een roof-spotpassage die zonder Stage row en Hall beams leesbaar blijft, daarna pas nieuwe roof-bars en een extra spotrij op de back towers. Vervolgens volgen samenhang, comfortlogging, prestaties, scherm/zaal/camera, langere praktijkbeoordeling en lokale iteraties. De candidate status is geen artistieke goedkeuring.
+Volgende stappen zijn de artistieke beoordeling van de uitgebreide rig en een roof-spotpassage die zonder Stage row en Hall beams leesbaar blijft. Vervolgens volgen samenhang, comfortlogging, prestaties, scherm/zaal/camera, langere praktijkbeoordeling en lokale iteraties. De candidate status is geen artistieke goedkeuring.
diff --git a/project.godot b/project.godot
index a66d5f0..85ed1b5 100644
--- a/project.godot
+++ b/project.godot
@@ -5,7 +5,7 @@ config_version=5
 [application]
 
 config/name="Stage Visualizer"
-config/version="0.60.0-test2"
+config/version="0.60.0-test3"
 run/main_scene="res://main.tscn"
 config/features=PackedStringArray("4.7", "Forward Plus")
 
diff --git a/scripts/rig.gd b/scripts/rig.gd
index 94faa4b..b900631 100644
--- a/scripts/rig.gd
+++ b/scripts/rig.gd
@@ -184,6 +184,7 @@ func build() -> void:
 		var z := Hall.BACK + 1.0
 		Kit.truss(chords, braces, Vector3(x, Hall.DECK, z), Vector3(x, 13.8, z), 0.3)
 		for j in 3: _add(BEAM, "back", Vector3(x, 6.5 + j * 3.0, z + 0.15), Vector3.BACK, -1, k / 7.0, j)
+		_add(SPOT, "back", Vector3(x, 13.0, z + 0.15), Vector3.BACK, -1, k / 7.0, 3)
 		for j in 2: _batten("back", Vector3(x, 8.0 + j * 3.0, z + 0.22), -1, Vector3.UP, Vector3.BACK, k / 7.0)
 
 	# roof: two trusses over the stage, spots, washes and blinders at the crowd
@@ -195,6 +196,10 @@ func build() -> void:
 	for k in 8:
 		var u := k / 7.0
 		_add(WASH, "roof", Vector3(-17.5 + u * 35.0, 11.55, rz - 5.0), Vector3.DOWN, -1, u, 1)
+	# Eight addressable bars fill the gaps between the rear roof-truss washes.
+	for k in 8:
+		var u := (k + 0.5) / 8.0
+		_batten("roof", Vector3(-17.5 + u * 35.0, 11.1, rz - 5.0), -1, Vector3.RIGHT, Vector3.DOWN, u)
 	for k in 8:
 		var x := -17.5 + k * 5.0
 		_blinder(Vector3(x, 11.4, rz + 0.35), Vector3(x * 1.3, 1.5, 6.0))
diff --git a/tools/test_stage_detail.gd b/tools/test_stage_detail.gd
index 71b9dd4..cede69a 100644
--- a/tools/test_stage_detail.gd
+++ b/tools/test_stage_detail.gd
@@ -16,7 +16,7 @@ func _run() -> void:
 	var rig := Rig.new()
 	root.add_child(rig)
 	rig.build()
-	check(rig.fixtures.size() == 212, "The symmetric back towers add only their three planned heads")
+	check(rig.fixtures.size() == 220, "The rig adds one roof spot per symmetric back tower")
 	var tower_x := {}
 	for f in rig.fixtures:
 		if f.group == "back": tower_x[snappedf(f.mount.x, 0.01)] = true
@@ -27,6 +27,18 @@ func _run() -> void:
 		for i in range(ordered_towers.size()):
 			check(is_equal_approx(float(ordered_towers[i]), -float(ordered_towers[7 - i])), "Back towers must mirror around the screen centre")
 			if i > 0: check(is_equal_approx(float(ordered_towers[i]) - float(ordered_towers[i - 1]), 6.0), "Back towers must have equal 6 m spacing")
+	var upper_spots := rig.fixtures.filter(func(f): return f.group == "back" and f.kind == Rig.SPOT)
+	check(upper_spots.size() == 8, "Every back tower must carry one top-row spot")
+	for f in upper_spots:
+		check(is_equal_approx(f.mount.y, 13.0) and f.row == 3, "Top-row spots must sit above the beams and below the tower cap")
+	var roof_bars := rig.battens.filter(func(b): return b.group == "roof")
+	check(roof_bars.size() == 8, "The stage roof adds eight pixel bars between the washes")
+	var roof_x: Array = roof_bars.map(func(b): return b.mount.x)
+	roof_x.sort()
+	if roof_x.size() == 8:
+		for i in range(roof_x.size()):
+			check(is_equal_approx(float(roof_x[i]), -float(roof_x[7 - i])), "Roof bars must mirror around the screen centre")
+			if i > 0: check(is_equal_approx(float(roof_x[i]) - float(roof_x[i - 1]), 4.375), "Roof bars must keep equal spacing")
 	for label in ["DelayMounts", "DelaySafeties", "TowerFeet"]:
 		check_batch(rig, label)
 	var mounts := rig.get_node_or_null("DelayMounts") as MultiMeshInstance3D