examples.json

[
  {
    "title": "Alternating Blink Pattern",
    "description": "Hint: Try changing the values of the delay() functions to create different speeds.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-alternate",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "Appending to a File",
    "description": "Appending to a File \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-append-file",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Basic beeping code",
    "description": "But don't worry - the ESP32's PWM system is actually way more powerful and flexible than the old tone() function.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/buzzer-basic-beep",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/buzz-buzzer/"
  },
  {
    "title": "Basic BLE Server Example",
    "description": "Basic BLE Server Example \u2014 from the tinyDocs \u201cBluetooth Low Energy (BLE)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/bluetooth-ble-server",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/bluetooth/"
  },
  {
    "title": "Basic Blink Program",
    "description": "Both LEDs on your tinyCore should now be flashing On and Off like the GIF above.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-basic",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "Basic button reading",
    "description": "You'll see it constantly telling you whether the button is pressed or not.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/button-press-basic",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/button-press/"
  },
  {
    "title": "Basic Code: Write and Read a File",
    "description": "Basic Code: Write and Read a File \u2014 from the tinyDocs \u201cWhat is an SD Card?\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sd-card-write-and-read",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/5_reference/basics/sd-card/"
  },
  {
    "title": "Basic output example",
    "description": "Make sure the baud rate dropdown (bottom right) is set to 115200 to match your code.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-monitor-basic-output",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "Basic Web Server",
    "description": "Basic Web Server \u2014 from the tinyDocs \u201cWiFi\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/wifi-basic-web-server",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/wifi/"
  },
  {
    "title": "Basic WiFi Connection",
    "description": "Basic WiFi Connection \u2014 from the tinyDocs \u201cWiFi\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/wifi-basic-connection",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/wifi/"
  },
  {
    "title": "Code for External LED",
    "description": "Code for External LED \u2014 from the tinyDocs \u201cHow to Control LEDs with the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-external-led",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "CSV Data Logging",
    "description": "CSV Data Logging \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-csv-logger",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Debugging with timestamps",
    "description": "This creates professional-looking debug logs with timestamps, making it easier to understand the timing of events in your code.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-monitor-timestamps",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "Delete and List Files",
    "description": "Delete and List Files \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-delete-and-list",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Detecting button events",
    "description": "Constantly checking if a button is pressed gets annoying fast.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/button-press-events",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/button-press/"
  },
  {
    "title": "Flash the tinyCore",
    "description": "Our IMU example demonstrates how to initialize the IMU and view it\u2019s data graphed out via the Serial Plotter in Arduino.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/imu-serial-plotter",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/1_get-started/imu/"
  },
  {
    "title": "Flash the tinyCore",
    "description": "Our IMU example demonstrates how to initialize the IMU and view it\u2019s data graphed out via the Serial Plotter in Arduino.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/imu-motion-plotter",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/detect-motion/"
  },
  {
    "title": "Hello World (Text on Screen!)",
    "description": "The tinyCore does all the math in its own memory first, and then blasts the entire finished frame to the OLED all at once.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/i2c-display-hello-world",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/i2c-display/"
  },
  {
    "title": "Initializing the SD Card",
    "description": "Initializing the SD Card \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-init",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Interactive buzzer",
    "description": "Interactive buzzer \u2014 from the tinyDocs \u201cHow to Control a Buzzer (Analog Output)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/buzzer-interactive",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/buzz-buzzer/"
  },
  {
    "title": "Interactive Physics: The IMU Digital Hourglass",
    "description": "Displaying static text is great, but your tinyCore has a built-in 6DOF IMU!",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/i2c-display-imu-hourglass",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/i2c-display/"
  },
  {
    "title": "Light sensor (photoresistor)",
    "description": "An LDR (Light Dependent Resistor) changes its resistance based on how much light hits it.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/read-sensor-photoresistor",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/read-sensor-value/"
  },
  {
    "title": "Manual Brightness Control",
    "description": "Manual Brightness Control \u2014 from the tinyDocs \u201cHow to Control LEDs with the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-brightness",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "Memory and performance monitoring",
    "description": "Memory and performance monitoring \u2014 from the tinyDocs \u201cHow to use the Serial Monitor and Serial Plotter\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-monitor-memory-stats",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "MQTT Client",
    "description": "MQTT Client \u2014 from the tinyDocs \u201cWiFi\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/wifi-mqtt-client",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/wifi/"
  },
  {
    "title": "Multiple buttons, multiple behaviors",
    "description": "This gives you two different interaction modes: button 1 toggles the LED state permanently, while button 2 makes it flash rapidly but only while you hold it down.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/button-press-multiple-buttons",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/button-press/"
  },
  {
    "title": "Multiple sensors at once",
    "description": "Multiple sensors at once \u2014 from the tinyDocs \u201cHow to Read Sensor Values (Analog Input)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/read-sensor-multiple-sensors",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/read-sensor-value/"
  },
  {
    "title": "Multiple variable plotting",
    "description": "This creates four different colored lines on the plotter.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-plotter-multi-variable",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "On the tinyCore",
    "description": "ESP-NOW is built into the ESP32-S3 \u2014 no libraries to install, no extra hardware.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/esp-now-basic",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/5_reference/basics/esp-now/"
  },
  {
    "title": "OTA (Over-the-Air) Updates",
    "description": "OTA (Over-the-Air) Updates \u2014 from the tinyDocs \u201cWiFi\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/wifi-ota-updates",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/wifi/"
  },
  {
    "title": "Play a real song",
    "description": "Play a real song \u2014 from the tinyDocs \u201cHow to Control a Buzzer (Analog Output)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/buzzer-song",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/buzz-buzzer/"
  },
  {
    "title": "Playing different tones",
    "description": "Playing different tones \u2014 from the tinyDocs \u201cHow to Control a Buzzer (Analog Output)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/buzzer-tones",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/buzz-buzzer/"
  },
  {
    "title": "PWM Control for All Three LEDs",
    "description": "PWM Control for All Three LEDs \u2014 from the tinyDocs \u201cHow to Control LEDs with the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-pwm-wave",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "Qwiic Joystick",
    "description": "Read a Qwiic joystick and play Asteroids or Pong with it in the Visual view.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/qwiic-joystick",
    "board": "tinyCore + Qwiic Joystick",
    "category": "basics"
  },
  {
    "title": "Reading a potentiometer",
    "description": "Middle pin of potentiometer \u2192 GPIO 1 on tinyCore 3.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/read-sensor-potentiometer",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/read-sensor-value/"
  },
  {
    "title": "Reading from a File",
    "description": "Reading from a File \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-read-file",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Reading input from Serial Monitor",
    "description": "The Serial Monitor isn't just for output - you can send commands to your tinyCore too.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-monitor-read-input",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "Real sensor data visualization",
    "description": "This example shows how to plot real sensor data alongside simulated signals.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-plotter-sensor-data",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "RGB Mood Light Controller",
    "description": "RGB Mood Light Controller \u2014 from the tinyDocs \u201cBluetooth Low Energy (BLE)\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/bluetooth-rgb-mood-light",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/bluetooth/"
  },
  {
    "title": "Single variable plotting",
    "description": "You'll see a beautiful sine wave scrolling across the screen in real-time.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/serial-plotter-single-variable",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/serial-monitor-plotter/"
  },
  {
    "title": "Smart LED control",
    "description": "Cover the sensor to make it \"dark\" and watch the LED turn on.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/read-sensor-smart-led",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/read-sensor-value/"
  },
  {
    "title": "Smooth Breathing Effect",
    "description": "You should see your LEDs fading off and on smoothly, almost like two fireflies!",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-breathing",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "SOS Signal",
    "description": "SOS Signal \u2014 from the tinyDocs \u201cHow to Control LEDs with the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/blink-sos",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/blink-led/"
  },
  {
    "title": "The Complete Motion Tracker Code",
    "description": "The Complete Motion Tracker Code \u2014 from the tinyDocs \u201cBuilding Your First Project: A Smart Motion Tracker\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/motion-tracker",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/1_get-started/motion-tracker/"
  },
  {
    "title": "The I2C Scanner: Your Best Debugging Tool",
    "description": "An I2C scanner is a short program that checks every possible address (1\u2013127) and reports which ones respond.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/i2c-scanner",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/5_reference/basics/i2c/"
  },
  {
    "title": "Toggle behavior vs direct control",
    "description": "This is like a light switch in your house - press once for on, press again for off.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/button-press-toggle-vs-direct",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/button-press/"
  },
  {
    "title": "Understanding NOT logic",
    "description": "The LED should be glowing when you're not touching the button, and turn off the moment you press it.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/button-press-not-logic",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/button-press/"
  },
  {
    "title": "Using It in Code",
    "description": "The tinyCore reads the LSM6DSOX via I2C using the Adafruit LSM6DS Arduino library.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/imu-read-orientation",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/5_reference/basics/imu/"
  },
  {
    "title": "Visualizing with Serial Plotter",
    "description": "Reading numbers is okay, but seeing the data as a graph is way cooler.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/read-sensor-plotter",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/read-sensor-value/"
  },
  {
    "title": "WebSocket Server",
    "description": "WebSocket Server \u2014 from the tinyDocs \u201cWiFi\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/wifi-websocket-server",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/wifi/"
  },
  {
    "title": "Writing to a File",
    "description": "Writing to a File \u2014 from the tinyDocs \u201cHow to use SD Cards on the tinyCore\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "basics/sdcard-write-file",
    "board": "tinyCore (ESP32-S3)",
    "category": "basics",
    "docsUrl": "https://tinydocs.cc/2_tiny-core/basics/save-data-to-sdcard/"
  },
  {
    "title": "Basic Connection Code",
    "description": "That IP is what you type into a browser to reach a web server running on the tinyCore.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "advanced/wifi-connect-reference",
    "board": "tinyCore (ESP32-S3)",
    "category": "advanced",
    "docsUrl": "https://tinydocs.cc/5_reference/advanced/wifi/"
  },
  {
    "title": "Fade an LED",
    "description": "Fade an LED \u2014 from the tinyDocs \u201cWhat is PWM?\u201d guide.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "advanced/pwm-fade-led",
    "board": "tinyCore (ESP32-S3)",
    "category": "advanced",
    "docsUrl": "https://tinydocs.cc/5_reference/advanced/pwm/"
  },
  {
    "title": "MCP4725 (I2C, 12-bit)",
    "description": "One output channel, 4,096 voltage steps, dead-simple I2C interface.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "advanced/dac-mcp4725",
    "board": "tinyCore (ESP32-S3)",
    "category": "advanced",
    "docsUrl": "https://tinydocs.cc/5_reference/advanced/dac/"
  },
  {
    "title": "Play a Tone on a Buzzer",
    "description": "The Arduino analogWrite() and tone() functions don't work on ESP32.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "advanced/pwm-play-tone-buzzer",
    "board": "tinyCore (ESP32-S3)",
    "category": "advanced",
    "docsUrl": "https://tinydocs.cc/5_reference/advanced/pwm/"
  },
  {
    "title": "Reading an Analog Value",
    "description": "The ESP32-S3 stores factory calibration data in its eFuse memory, and analogReadMilliVolts() applies it automatically.",
    "owner": "Mister-Industries",
    "repo": "tinyStudio-examples",
    "path": "advanced/adc-read-analog",
    "board": "tinyCore (ESP32-S3)",
    "category": "advanced",
    "docsUrl": "https://tinydocs.cc/5_reference/advanced/adc/"
  },
  {
    "title": "tinySniff: Basic Demo",
    "description": "Reads all three tinySniff MEMS gas sensors and streams them out as a graph.",
    "owner": "Mister-Industries",
    "repo": "tinySniff",
    "path": "Software/Arduino/Examples/tinySniff_Monitor",
    "board": "tinyCore + tinySniff HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinysniff/example-code/"
  },
  {
    "title": "tinySniff: Google Sheets",
    "description": "Logs all three tinySniff gas sensors to a Google Sheet in real time over WiFi.",
    "owner": "Mister-Industries",
    "repo": "tinySniff",
    "path": "Software/Arduino/Examples/tinySniff_Sheets",
    "board": "tinyCore + tinySniff HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinysniff/example-code/"
  },
  {
    "title": "tinySniff: SD Card Logger",
    "description": "Logs all three tinySniff MEMS gas sensors to a timestamped CSV file on the SD card.",
    "owner": "Mister-Industries",
    "repo": "tinySniff",
    "path": "Software/Arduino/Examples/tinySniff_SDLogger",
    "board": "tinyCore + tinySniff HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinysniff/example-code/"
  },
  {
    "title": "tinySniff: Text Notifications",
    "description": "Monitors all three tinySniff gas sensors against configurable thresholds and sends an email alert when any channel exceeds its limit.",
    "owner": "Mister-Industries",
    "repo": "tinySniff",
    "path": "Software/Arduino/Examples/tinySniff_Alarm",
    "board": "tinyCore + tinySniff HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinysniff/example-code/"
  },
  {
    "title": "tinySpeak: tinyAIText",
    "description": "A text-based AI assistant.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyAIText",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyAIVoice",
    "description": "Full Voice Assistant Pipeline.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyAIVoice",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyAIVoice (ElevenLabs)",
    "description": "Premium Voice Assistant Pipeline using ElevenLabs TTS.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyAIVoice_EL",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyMP3Player",
    "description": "Plays MP3 files from the SD card.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyMP3Player",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyRecorder",
    "description": "A standalone voice recorder.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyRecorder",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinySoundboard",
    "description": "A motion-triggered soundboard.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinySoundboard",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyTheremin",
    "description": "A motion-controlled musical instrument.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyTheremin",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyWalkieTalkie",
    "description": "Push-to-Talk Intercom using ESP-NOW.",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyWalkieTalkie",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  },
  {
    "title": "tinySpeak: tinyWebSynth",
    "description": "Chiptune synthesizer: live piano, 2-track melodic step sequencer, 3-track drum machine (Kick, Snare, Hi-Hat).",
    "owner": "Mister-Industries",
    "repo": "tinySpeak",
    "path": "Software/Arduino/Examples/tinyWebSynth",
    "board": "tinyCore + tinySpeak HAT",
    "category": "hats",
    "docsUrl": "https://tinydocs.cc/3_tiny-hats/tinyspeak/example-code/"
  }
]